Skip to content

Product / TCM

Halton TCM – Conical diffuser

Ideal for warm spaces due to the cooling applications.

  • Suitable for cooling applications with supply/room air temperature difference as low as -12 °C
  • Integrated or suspended ceiling installation
Request a Quote

Overview

  • Suitable for horisontal supply and exhaust
  • Suitable for cooling applications with supply/room air temperature difference as low as -12 °C
  • Integrated or suspended ceiling installation
  • Circular duct connection with rubber gasket
  • Detachable cone module, enabling the cleaning of the diffuser and ductwork

Product Models and Accessories

  • Models integrated in a panel for installation in modular suspended ceilings with dimension options of 450×450, 600×600 or 675×675 mm
  • Plenum options with measurement and adjustment functions
  • Measurement and adjustment module

Quick selection

Dimensions

NS W  H H1 ØD
100 330 80 17 99
125 330 80 17 124
160 330 73 17 159
200 457 88 22 199
250 610 110 27 249
315 610 95 27 314
355 863 139 35 354
400 863 129 35 399
450 863 121 35 449

Material

 Part  Material  Finishing
 Diffuser  Steel  Epoxy-painted
White (RAL 9003)
30% gloss
 Plenum  Galvanised steel

Accessories

 Accessory Code  Description
 Balancing plenum with airflow
measurement and adjustment unit
TRI/N  For balancing,
equalising the airflow
 Plenum TRH  Plenum for duct connection
(with or without insulation)
 Sound attenuation IN  Polyester fibre as sound attenuation
material in Halton TRI plenum.
Mineral wool as sound attenuation
material in Halton TRH plenum.
 Airflow measurement
and adjustment unit
MSM  For supply installation
 Airflow adjustment unit LD  Circular galvanised steel unit for airflow
adjustment (inside the coupling sleeve)
 Airflow adjustment damper DD  Circular galvanised steel blade damper
for flow adjustment (inside the coupling
sleeve)

Product models

 Product model Code  Description
 Diffuser integrated in front panel,
600×600 mm
TCM/B  Sizes 100, 125, 160, 200, 250 and 315
are available integrated in a steel
panel for installation in a modular
600×600 mm suspended ceiling.
The external dimensions of the
front panel are 595×595 mm.
 Diffuser integrated in front panel,
450×450 mm
TCM/C  Sizes 100, 125 and 160 are available
integrated in a steel panel for
installation in a modular 450×450 mm
suspended ceiling.
The external dimensions of the
front panel are 445×445 mm.
 Diffuser integrated in front panel,
670×670 mm
TCM/D  Sizes 100, 125, 160, 200, 250 and 315
are available integrated in a steel
panel for installation in a modular
675×675 mm suspended ceiling.
The external dimensions of the
front panel are 670×670 mm.

Function

Supply air is divided into several jets through the cones.
The divergent sections of the diffuser create negative pressure below the diffuser so room air is induced into the supply air device. Room air and supply air mix.

This internal induction reduces temperature and the air velocity into the space.
The process is the same outside the diffuser between the supply and mixed room air, with external induction further reducing velocity and the temperature difference between supply and room air.
This effect reduces the flow disturbances.

The diffuser can also be used as an exhaust unit.

Installation

Code description
1.  TCM
2.  TRH plenum

The Halton TCM diffuser can be installed flush with a suspended ceiling or fully exposed in the space.
The diffuser is connected either directly to the duct or using a Halton TRH plenum or Halton TRI balancing plenum.
When it is connected directly to ductwork, a safety distance of minimum 3D upstream of the diffuser should be maintained.

Installation with plenum Halton TRI or TRH

TCM ØD TRI H1 H2
100 100 TRI-100-100 17 249…279
125 125 TRI-125-125 17 279…309
160 160 TRI-160-160 17 312…342
200 200 TRI-200-200 22 377…407
250 250 TRI-250-250 27 394…424
315 315 TRI-315-315 27 494…524

When the Halton TRI spigot is installed in the plenum, the H2 dimension can be reduced by 60 mm.

Dimensions of ceiling opening

NS ØW1
100 266
125 266
160 266
200 406
250 533
315 533
355 787
400 787
450 787

Adjustment

The airflow rate can be adjusted and measured only when the diffuser is installed.

In order to enable airflow adjustment and measurement of airflow rate, it is recommended that the diffuser be connected to a plenum equipped with the MSM module.
The supply flow rate is determined using measurement and adjustment module MSM.

Detach the conical central core and pass the tubes and control spindle through the diffuser.
Measure the differential pressure with a manometer. The flow rate is calculated using the formula below.

Adjust the airflow rate by rotating the control spindle until the desired setting is achieved.
Lock the damper position with a screw.
Replace the tubes and spindle in the plenum and push the conical central core back into place.

The k-factors for installations with different safety distances
(D = duct diameter)

TRH/TRI >8xD min 3xD
125 9.9 12.6
160 16.9 21.9
200 28.3 31.0
250 47.9 51.5
315 78.6

Airflow adjustment damper DD

The airflow rate is adjusted by turning the damper blades behind the diffuser with a screwdriver. The measurement is carried out when the diffuser is installed.

Servicing

Remove the conical central core by gently drawing it out by the central panel (simultaneously, a small pin on the inner side of the external cone is pushed and the assembly is turned clockwise, until it comes free).

Clean the parts by wiping them with a damp cloth.

Push the conical central core back into place so that the springs lock.

Option: with balancing plenum Halton TRI + MSM or TRH + MSM

Remove the measurement and adjustment module by gently pulling the shaft (not the control spindle).
Wipe the parts with a damp cloth, instead of immersing in water.

Reassemble the measurement and adjustment module by pushing the shaft until the module meets the stopper.

Push the conical central core back into place so that the pin locks.

Specification

The diffuser comprises several cones, made of epoxy-painted steel with a white (RAL 9003) standard colour.

The diffuser is suitable for exposed installation or installation flush to the ceiling.

The diffuser is connected to the ductwork using a Halton TRI balancing plenum, which utilises polyester fibre with a washable surface as sound attenuation material.

Option

The diffuser is connected to the ductwork using a Halton TRH plenum, which utilises mineral wool as sound attenuation material.

The plenum comprises an airflow measurement and adjustment module.
The diffuser is suitable for installation in 450×450 mm, 600×600 mm and 675×675 mm false ceilings.
The conical central core is removable.

The supply air pattern is radial in an angle of 360 degrees.

Order code

TCM-D, WS-CO-ZT

D = Connection size
100, 125, 160, 200, 250, 315, 355, 400, 450

Other Options and Accessories

WS = Width of suspended ceiling tile
N        Standard
450     450×450
600     600×600
675     675×675

CO = Colour
SW     White
X        Special colour

ZT = Tailored product
N         No
Y         Yes (ETO)

Sub products

TRH     Plenum (Ceiling Diffusers)
TRI       Plenum (Diffusers)
DD      Airflow adjustment damper
LD      Airflow adjustment damper

Code example

TCM-100, WS=N,CO=SW,ZT=N

Downloads

  • Halton TCM – Conical diffuser

    Data

    en

    Shape 2
  • Halton TCM – Kartiokattohajottaja

    Data

    fi

    Shape 2
  • Halton TCM – Diffuseur conique

    Data

    fr

    Shape 2
  • Halton TCM – Konisk takspridare

    Data

    se

    Shape 2
  • Halton TCM – fr

    Data

    fr_FR
    Shape 2
Contact Us
  • Hidden
  • Max. file size: 64 MB.