Skip to content

Product / TRS

Halton TRS – Compact/conical diffuser

Ideal for high spaces.

  • Specially designed for large enclosures
  • Horisontal adjustable throw pattern with compact jet position

compact or conical air jet supply diffuser for wall or ceiling installations

 

Request a Quote

Overview

  • Specially designed for large enclosures
  • Horizontal adjustable throw pattern with compact jet position
  • Alternative throw patterns are selected by rotating the cone module
  • Long throw pattern with low velocity reduction
  • Alternative wide and short shape throw pattern
  • Circular duct connection

Quick selection

Fig.1. Halton TRS with compact jet, narrow

Fig.2. Halton TRS with compact jet, wide

Dimensions

NS H H1
Wide
H1
Narrow
H2 ØD ØD1
200 90 100 85 28 159 198
250 114 130 110 35 199 248
315 140 155 130 39 249 313
400 170 190 140 40 314 398
500 208 245 165 43 399 498

Weight

NS kg
200 1.00
250 1.53
315 2.44
400 3.39
500 5.40

Material

Part Material  Note
Casing Steel  –
Cone module Steel  –
Finishing Painted,
White
(RAL 9003/30% gloss)
 Special RAL colour available

Accessories

 Accessory Code  Description
 Balancing plenum TRI For balancing, equalising the airflow
and attenuating the duct noise
(polyester fibre)
Balancing plenum TRH For balancing, equalising the airflow
and attenuating the duct noise
(mineral wool and polyester fibre)

Function


                         Narrow jet                                           Wide jet

Air is supplied to the space through the selectable cone module
The supply air pattern can be selected for wide or narrow jet by rotating the cone module.

The narrow compact jet is used for long air pattern in heating applications and the conical wide jet for shorter air pattern in cooling applications.

The angle for narrow air pattern can be adjusted.

Installation

NS ØD1
200 198
250 248
315 313
400 398
500 498

The diffuser is connected either directly to the duct by screwing or by riveting or alternatively to the Halton TRI balancing plenum.

The recommended minimum safety distance upstream of the diffuser is 3xD.

Installation with Halton TRI

The collar of Halton TRI plenum can be installed either internally in the plenum or externally onto the bottom of the plenum. The height of the unit for the external installation is presented in the table below. When the collar is installed internally, the total height H4 is reduced by 60 mm.

Note: The technical performance for the combination of supply air diffuser and plenum is presented separately for the two different installations.

NS TRI (ØD2-ØD) H3 H4
200 TRI-160-200 130 249
250 TRI-200-250 160 289
315 TRI-250-315 220 339
400 TRI-315-400 265 403

Adjustment

The Halton TRS itself has no means for airflow adjustment.

In order to enable airflow adjustment and measurement of airflow rate it is recommended that the diffuser be connected to the Halton TRI balancing plenum. The supply flow rate is determined by using the MSM measurement and adjustment module.

Pass the tubes and control spindle through the cone module of the diffuser.
Measure the differential pressure using a manometer. The flow rate is calculated using the formula below.

Adjust the airflow rate by rotating the control spindle until the desired setting is achieved. Lock the damper position with a screw.

Replace the tubes and spindle in the plenum.

The k-factor for installations with different safety distances
(D= duct diameter)

TRI > 8 x D min 3 x D
100 6.0 7.5
125 9.9 12.6
160 16.9 21.9
200 28.3 31.0
250 47.9 51.5
315 78.6

Servicing

Wipe the diffuser with a damp cloth.

Option with balancing plenum

Detach the diffuser from the plenum.
Remove the measurement and adjustment module by gently pulling out the shaft (NB. not the control spindle or measurement tubes!).

Wipe the parts with a damp cloth, instead of immersing in water.
Reassemble the measurement and adjustment module by pushing in the shaft back into place until the unit meets the stopper.

Reinstall the diffuser.

Specification

The diffuser is made of painted steel with a white (RAL 9003) colour.

The diffuser is made in two sections: an outer sleeve and an inner concentric cone.

The supply air pattern is selectable for wide or narrow jet by rotating the cone module.
The angle of narrow supply air pattern is adjustable.

Order code

TRS-D; CO-MO-ZT

D = Connection size
200, 250, 315, 400, 500

Other options and accessories

CO = Colour
SW   White (RAL 9003)
X       Special colour (RAL xxxx)

MO = Actuator type
NA    Not assigned
M1    LM24A SR

ZT = Tailored product
N        No
Y         Yes (ETO)

Sub products

TRI     Plenum
TRH    Plenum

Code example

TRS-200, CO=SW, MO=NA, ZT=N

Downloads

  • Halton TRS – Compact/conical diffuser

    Data

    en

    Shape 2
  • Halton TRS – Suihkusuutinhajotin

    Data

    fi

    Shape 2
  • Halton TRS – Diffuseur longue portée

    Data

    fr

    Shape 2
  • Halton TRS – Weitwurfdüse

    Data

    de

    Shape 2
  • Halton TRS – Jetstrålespridare

    Data

    se

    Shape 2
  • Halton TRS-C 可调喷流风口

    Data

    cn

    Shape 2
  • Halton TRS – fr

    Data

    fr_FR
    Shape 2
Contact Us
  • Hidden
  • Max. file size: 64 MB.