Skip to content

Product / ULA

Halton ULA – Supply and exhaust air valve

Aesthetic in design and easy to adjust.

  • Suitable for supply or exhaust air
  • Wall or ceiling installation
Request a Quote

Overview

  • Suitable as supply or exhaust air valve.
  • Wall or ceiling installation.
  • Adjustable airflow rate.
  • Ability to measure airflow rate.
  • Attenuates duct noise.
  • Flow pattern can be directed to one direction.
  • Installation without an installation frame directly into ductwork or with a separate installation frame.

Product models and accessories

  • Model with installation frame.
  • Protection ring for protecting the surfaces from smudging.
  • Extension part for detaching the valve from surfaces.

Quick selection

Fig.1. Halton ULA, radial jet

Fig.2. Halton ULA, exhaust

Dimensions and weight

NS ØW ØW1
100 140 133
125 165 155
160 200 189
200 251 240

Weight

NS kg
100 0.4
125 0.5
160 0.6
200 0.9

Material

Part Material Note
Collar Steel
Front panel Steel
Attenuation panel Polyethylene
Sector plate Polyethylene
Gasket Polyurethane
Finishing Painted, white (RAL 9003 / 30%) Special colour available

Accessories

Accessory Code Description
Cover plate CS For protection of the surfaces from smudging and for directing the air jet
in a grid-structured ceiling
Extension part EP Extension part for detaching the valve from the surface/ standard height 50 mm
Installation frame LF Installation frame without gasket/ height 50 mm
Installation frame GF Installation frame with gasket/ height 50 mm
Installation frame DF Installation frame with duct dimensions can be installed directly to duct parts such as bending or T-branch etc

 
Fig.1. Cover plate (CS)                               Fig.2. Extensions part (EP)

 
Fig.3. Installation frame (LF)                        Fig.4. Installation frame (GF)


Fig.5.  Installation frame (DF)

Function


                            Supply                                                   Exhaust

In supply air application in the desired flow pattern is directed using an internal sector plate.

Pressure loss and airflow rate are dependent on both the flow pattern adjustment and position of the front panel.

The valve attenuates duct noise.

The desired pressure loss and airflow rate can be adjusted in an exhaust air application, by removing the sector plate and adjusting the front panel position.

Installation

The collar of Halton ULA is installed either directly into the end of a duct with fixing springs or alternatively with the aid of a separate installation frame (LF, GF or DF).
The supply air valve can be installed in contact with the ceiling or wall surface, with or without a protection ring (CS), or with an extension part (EP).

Protection ring (CS)

The CS protection ring protects the surface from smudging and can also be used for directing the air jet in an open grid-structured ceiling installation.

NS Ø W2
100 290
125 315
160 350
200 400

Extension part (EP)

The EP extension part allows the valve to be suspended from the ceiling surface, allowing the supply air jet to be directed clear of a nearby obstacle.

NS Ø W4
100 150
125 175
160 210
200 260

Installation hole in hollow core slabs

NS Ø W3
100 96-101
125 121-126
160 155-161
200 195-201

Adjustment

In the supply application the sector plate is positioned prior to airflow direction. In an exhaust application the sector plate is not used, yet the spring shall be conserved.
The Halton ULA valve is adjusted by rotating the front panel. Measure the opening (A) position (in mm) of the front panel.

Set a probe inside the valve and measure the differential pressure with a manometer. The airflow rate is calculated using the formula below.
After adjustment, lock the front panel with the locking nut.

Servicing

Code description
1.   Front panel
2.   Sector plate
3.   Collar

Loosen the valve from duckwork and unscrew the front panel (1) from the collar (3) for cleaning. Remove the sector plate (2) by pulling gently to detach the spring. Clean the components with a damp cloth, instead of immersing in water. Reassemble in reverse order after cleaning.

Specification

The supply and exhaust valve shall have a detachable front panel and collar made of painted steel, with a white (RAL 9010) standard colour.

The collar shall have fixing springs and comprise a sealing gasket to be fixed directly to the duct. The front panel shall have a sound attenuation panel to reduce duct noise.

When used for supply, the desired flow pattern shall be adjusted by rotating the front panel and using the internal sector plate (180° or 360°).

Order code

ULA/S-D; CO-ZT

S = Model
N   Standard with fastening springs
A    For installation with a separate frame

D = Duct connection size (mm)
100, 125, 160, 200

Other options and accessories

CO = Colour
SW    Signal white (RAL 9003)
X        Special colour (RAL xxxx)

ZT  = Tailored product
N        No
Y        Yes (ETO)

Sub products

CS     Cover plate (ULA)
EP     Extension part
DF     Installation frame for duct parts
GF     Installation frame with gasket
LF      Installation frame without gasket

Code example

ULA/N-100, CO=SW, ZT=N

Downloads

  • Halton ULA – Supply and exhaust air valve

    Data

    en

    Shape 2
  • Halton ULA – Tulo- ja poistoilmaventtiili

    Data

    fi

    Shape 2
  • Halton ULA – Vanne

    Data

    fr

    Shape 2
  • Halton ULA – Zu- und Abluftventil

    Data

    de

    Shape 2
  • Halton ULA – Ventil

    Data

    se

    Shape 2
  • ULA 圆形送排风口

    Data

    cn

    Shape 2
  • Halton ULA – fr

    Data

    fr_FR
    Shape 2
Contact Us
  • Hidden
  • Max. file size: 64 MB.