Skip to content

Product / KFM

KFM 厨房油烟罩

浩盾 KFM 是一款用于船舶和钻井平台的厨房油烟罩,用于清除烹饪环境中产生的油烟

Request a Quote

特点

  • 该项设计符合 USPHS 要求
  • 配有可拆卸过滤器,便于清洗
  • 十分利于环境卫生
  • 防止油脂沉积物堆积造成严重的火灾隐患
  • 可选用浩盾捕获射流™ 技术以减少所需的排气量,提高烟罩捕获和覆盖效率,同时降低能耗
  • 高效油脂过滤采用 *UL 级的浩盾 KSA 多级旋风过滤器
  • 进气(如果包含捕获射流TM)和排气以及 T.A.B.™ 流量测量支管的标配包括照明设备和平衡阀,可用来精确有效地平衡气流,并实现高效调试
  • 不锈钢焊接结构

*) 保险商实验室,美国

Dimensions

KFM general drawings

KFM DIMENSIONS (mm)
A 195
B 1100-1900
C 115
D 100-200
H 350
H1 380
J 1/2L
L 1000-3000
P 185
S 1/2L
T 200
U 70
V Max 50

Note: Maintenance / light fixture hatch is as big as the construction allows.

Material

PART MATERIAL THICKNESS NOTE
Main body Stainless steel EN 1.4301 (AISI304) 1,25 mm Option: EN 1.4404 (AISI316L)
Light fixture Painted steel
Cables Halogen free

Construction

The KFM hood comprises a Capture Jet™ air supply module, a light fixture, adjustment dampers, airflow measurement taps and KSA grease filters. All parts of the hood are manufactured from polished stainless steel EN 1.4301 (AISI304). The Capture Jet™ supply plenum is thermally insulated through the use of mineral wool material to prevent condensation on the inner face above the cooking equipment. The hood is equipped with removable grease cup for collection of the grease.

PARTS

1 KSA grease filters
2 Lighting fixture
3 Lighting fixture power supply junction box
4 Maintenance hatch
5 Exhaust air connection, fire damper or shut-off damper* (available as an option) and adjustment damper
6 Fire damper junction box (available as an option)
7 Damper switch and indication (available as an option)
8 Capture air connection and adjustment damper

*If fire or shut-off damper is located at the duct, Halton suggests two default solutions for duct connection:

  • Eurovent-collar with flange
  • Welded L-collar

Eurovent-collar with flange

Welded L-collar

Weights of standard KFM hoods (kg)

B/L 1000 1500 2000 2500 3000
1100 40 60 80 100 110
1300 46 66 86 106 118
1500 51 71 92 111 126
1700 57 77 98 117 134
1900 63 83 103 123 142

The above table represents an indication of different size of average KFM hoods without Capture Jet technology. Weight does not include the fire damper.

Weights of standard KFM hoods with Capture Jet Technology (kg)

B/L 1000 1500 2000 2500 3000
1100 50 74 100 124 138
1300 56 80 105 129 146
1500 61 86 111 135 154
1700 67 92 117 141 162
1900 73 97 122 147 170

The above table represents an indication of different size of average KFM hoods with Capture Jet technology. Weight does not include fire damper.

Function

  1. Supply air enters the Capture JetTM plenum.
  2. Contaminated air and heat rises from the cooking appliances.
  3. Contaminated air is directed into the hood by Halton patented Capture JetTM technology.
  4. KSA multi-cyclone filters remove grease and contaminants from the air stream with the aid of centrifugal effect. According to independent laboratory tests KSA is the most efficient mechanical grease filter on the market.
  5. Filtered exhaust air.

Recommended exhaust airflow for KFM

RECOMMENDED EXHAUST AIRFLOW 
NUMBER OF KSA FILTERS MINIMUM l/s MAXIMUM l/s MINIMUM m3/h MAXIMUM m3/h
 1  130  201 468 724
 2  259  402 932 1447
 3  389  602 1400 2167
 4  518  803 1865 2891
 5  648  1004 2333 3614
 6  778  1205 2801 4338

Note:  KSA filter size 500x330x50 mm

Specifications

Suggested specification

General

The galley hoods shall be constructed from stainless steel EN 1.4301 (AISI304). The galley hoods shall be supplied complete with outer casing / main body, airflow measurement taps, exhaust air spigot connection with adjustment damper, maintenance hatch, light fixture, grease filters, grease cup. Classified fire damper in each exhaust connection. Classified fire damper in each exhaust connection is available as an option. he manufacture of all galley hoods shall be controlled by ISO 3834-2:2005, ISO 9001, 14001 and OHSAS 18001 standards. The design of hoods shall follow USPHS guidelines.

Construction

All parts shall be constructed of stainless steel sheet (thickness 1.25 mm) with a polished finish. The inside corners of the hood are rounded for easy cleanability according to USPHS guidelines. The joints at the lower edges of the device are welded. All visible screws are thumb screw type. The hood is equipped with a grease cup for removing the grease. There is a maintenance hatch in each hood for easy access above the hood.

Capture Jet plenum

The Capture JetTM plenum shall be insulated with sealed mineral wool. Plenum can be accessed through a maintenance hatch(es).

Capture Jet system

The hood shall be designed with Capture JetTM technology to reduce the exhaust airflow rate required and increase the capture and containment efficiencies of the hood, while reducing energy use.

Airflow measurement taps

Measurement taps shall be located on top of the hood for supply air and exhaust air measurement.

Halton KSA filter

  • Minimisation of grease deposits in the ducts
  • Enhanced hygiene and safety

The KSA grease filters shall be constructed of stainless steel. The grease filters shall be supplied in modular size of 500x330x50 mm and shall be removable via two folding handles. The grease filters shall have a honeycomb design in order to allow high grease filtration efficiency with the aid of centrifugal effect in filter honeycombs.

Mechanical filtration is recommended to be used in hoods with low utilization rate and cooking process producing mainly large grease particles (> 8 microns), e.g. food prepared with gas fryers, griddles and broilers (source ASHRAE).

Duct connections

The duct connections and adjustment dampers for exhaust air shall be constructed from stainless steel. The dampers shall be adjustable.

Light fixtures

Each hood shall be delivered with a fluorescent light fixtures or LED light fixtures providing approx. an average illuminance of 500 lux at the work surfaces of the cooking appliances. The light fixtures shall be suitable for a single-phase 230-VAC power supply and shall be manufactured to be of protection class IP67. The ballast and capacitor shall be located within the light frame. The core electric cables connecting the light fixture to the junction box shall be provided.The light fixture shall be installed on a hinged maintenance hatch, allowing access to the hood roof.

Fluorescent light fixture sizes

HOOD DIMENSION LENGTH WIDTH
L < 1250 mm, 2×24 W 720 mm 220 mm
> 1250 mm, < 2000 mm, 2×39 W 1020 mm 220 mm
> 2000 mm, 2×49 W 1620 mm 220 mm

LED light fixture sizes

HOOD DIMENSION LENGTH WIDTH
L < 1250 mm, 1×28 W 720 mm 175 mm
> 1250 mm, < 2000 mm, 1×42 W 1020 mm 175 mm
> 2000 mm, 1×69 W 1620 mm 175 mm

Maintenance hatch

Each hood shall be provided with a maintenance hatch made of stainless steel with a shock- resistant plastic window. The heat tolerance of the window shall be up to +115 °C. The hatch shall be easily opened and closed. The maintenance / light fixture hatch is as big as the construction allows.

Airflow measurement

∆Pst = Static pressure loss

∆PTAB = TAB pressure for airflow rate measurement

70, 100 = Damper opening in %

Product code

(S)=Model
(N) With Capture Jet
(S) Without Capture Jet
(L)=Length
1000-3000
(W)=Width
S=N: 1000-2000 S=S: 850-2000
Model S=N with Capture Jet
Model S=S without Capture Jet
(H)=Height of front end
350 mm
(MV)=Marvel
(N) No
(A) 1 sensor
(B) 2 sensors
(C) 3 sensors
(D) 4 sensors
(UB)=UV or MARVEL Box
(C) Marvel-box PL
(N) No
(MA)=Material
(SS) Stainless steel EN1.4301
(AS) Stainless steel EN1.4404
(DS)=Diameter of supply connection
100
125
160
180
200
(LF)=Light fixture
(A) Type SLR
(B) Type LED SLV
(FK)=Fire suppression system
(N) No
(1) 1 pc
(2) 2 pcs
(3) 3 pcs
(AC)=Accessories
(BL) Capture Jet fan with potentiometer
(HE) Ceiling condensation removal heating
Code example
KFM1/N-3000-2000-350,MV=N,UB=N,MA=SS,DS=100,LF=A,FK=1,ZT=Y,AC=BL

Downloads

  • KFM – Galley grease hood

    Data

    en

    Shape 2
  • KFM – Galley grease hood

    Data

    fi

    Shape 2
  • KFM – Galley grease hood

    Data

    fr

    Shape 2
  • KFM 厨房油烟罩

    Data

    cn

    Shape 2
  • Halton KFM datasheet 2022

    Data

    English
    Shape 2
  • Halton KFM datasheet 2022 – Italian

    Data

    Italian
    Shape 2
  • Halton KFM datasheet 2020 – Chinese

    Data

    Chinese
    Shape 2
Contact Us
  • Hidden
  • Max. file size: 64 MB.