TSB - Swirl diffuser

Square swirl diffuser for ceiling installation

Draught free square diffuser.  Different outlook than in TSS.

  • Horizontal air supply
  • Suitable for supply and exhaust
  • Ceiling integration installation
  • Supply air jet velocity is effectively reduced due to high mixing effect
  • Suited for installation in a modular 600x600 mm suspended ceiling
  • Circular duct connection with rubber gasket
  • Openable front panel enables cleaning of the terminal unit and supply ductwork.

ACCESSORIES

  • Balancing plenum with measurement and adjustment functions

The swirl diffuser shall be made of epoxy-painted steel with a white (RAL 9010) colour.
The swirl diffuser comprises fixed spiral blades to ensure high mixing rate.
 

Alternative 1; no balancing plenum

The diffuser shall have a galvanised steel casing with a spigot with integral gasket for connection to the circular duct.
The diffuser shall have a detachable perforated front panel to provide access to the duct.
 

Alternative 2; option with balancing plenum

The diffuser shall be connected to a balancing plenum equipped with a measurement and adjustment module.
The diffuser shall have a detachable perforated front panel to provide access to the measurement and adjustment module in the plenum.
The balancing plenum shall have a spigot with integral gasket for airtight duct connection.
The balancing plenum shall comprise sound attenuation material made of polyester fibre with a washable surface.

Introduction

TSB

Square swirl diffuser


 

  • Horizontal air supply
  • Suitable for supply and exhaust
  • Ceiling integration installation
  • Supply air jet velocity is effectively reduced due to high mixing effect
  • Suited for installation in a modular 600x600 mm suspended ceiling
  • Circular duct connection with rubber gasket
  • Openable front panel enables cleaning of the terminal unit and supply ductwork.

Accessories

  • Balancing plenum with measurement and adjustment functions
     

Dimensions


DIMENSIONS



NS  ØD 
160  159
200  199
250  249
315  314


Material


MATERIAL AND FINISHING


PART  MATERIAL  NOTE 
Casing Galvanised steel  
Front panel Steel  
Coupling sleeve Galvanised steel  
Duct gasket Rubber compound  
Finishing Epoxy-painted /
White RAL 9010
Special colours available

Accessories


ACCESSORIES

ACCESSORY  CODE  DESCRIPTION 
Balancing plenum TRI For balancing, equalising the airflow
and attenuating the duct noise

 

Function


FUNCTION



Horizontal radial swirl jet air is supplied into the space through the profiled spiral blades of the diffuser.
Supply air jet velocity is effectively reduced due to the high mixing effect.
TSB can also be used as an exhaust unit.

Installation


INSTALLATION



CODE  DESCRIPTION
1  FRONT PANEL
2  CASING

The TSB diffuser is connected either directly to the duct by screwing or by riveting or alternatively to the TRI balancing plenum.
Detach the front panel by pulling it gently down and let it hang by its hinges.
Direct the flow pattern in the desired directions by installing deflector panel on the perforated front panel.
Reattach the front panel by swinging up and pushing until the springs lock.

The recommended minimum safety distance upstream of the diffuser is 3xD.

Installation with TRI



The collar of the TRI plenum can be installed either internally in the plenum or externally onto the bottom of the plenum. The height of the unit is presented in the table below for the external installation. When the collar sleeve is installed internally, the total height H is reduced by 60 mm.

Note: The technical performance for the combination of supply air diffuser and plenum is presented separately for the two different installations.

TSB,(ØD)  ØD1  TRI  H 
160-600  160 TRI-160-160 383 - 433
200-600  160 TRI-160-200 383 - 433
200-600  200 TRI-200-200 433 - 483
250-600  200 TRI-200-250 433 - 483
250-600  250 TRI-250-250 497 - 547
315-600  250 TRI-250-315 497 - 547
315-600  315 TRI-315-315 543 - 593

Adjustment


ADJUSTMENT

The TSB itself has no means for airflow adjustment.
In order to enable airflow adjustment and measurement of airflow rate it is recommended that the diffuser be connected to the TRI balancing plenum.
The supply flow rate is determined by using the MSM measurement and adjustment module.
Open the front panel and pass the tubes and control spindle through the diffuser front panel. Replace the front panel.
Measure the differential pressure using a manometer. The flow rate is calculated using the formula below.


Adjust the airflow rate by rotating the control spindle until the desired setting is achieved.
Lock the damper position with a screw.
Replace the tubes and spindle in the plenum and replace the diffuser front panel.

K- factor for installations with different safety distances (D= duct diameter)

TRI  > 8 x D  min 3 x D 
160  16.9 21.9
200  28.3 31.0
250  47.9 51.5
315  78.6 -

Servicing


SERVICING

Detach the front panel of the diffuser by gently pulling it down and let it hang by its hinges.
Wipe the parts with a damp cloth.
Push the front panel back into place so that the springs lock.

Option with balancing plenum

Remove the measurement and adjustment module by gently pulling out the shaft (NB. not the control spindle or measurement tubes!).
Wipe the parts with a damp cloth instead of immersing in water.
Remount the measurement and adjustment module by pushing in the shaft until the module meets the stopper.
Push the front panel back into place so that the springs lock.

Specification


SUGGESTED SPECIFICATIONS

The swirl diffuser shall be made of epoxy-painted steel with a white (RAL 9010) colour.
The swirl diffuser comprises fixed spiral blades to ensure high mixing rate.

Alternative 1; no balancing plenum

The diffuser shall have a galvanised steel casing with a spigot with integral gasket for connection to the circular duct.
The diffuser shall have a detachable perforated front panel to provide access to the duct.

Alternative 2; option with balancing plenum

The diffuser shall be connected to a balancing plenum equipped with a measurement and adjustment module.
The diffuser shall have a detachable perforated front panel to provide access to the measurement and adjustment module in the plenum.
The balancing plenum shall have a spigot with integral gasket for airtight duct connection.
The balancing plenum shall comprise sound attenuation material made of polyester fibre with a washable surface.

Product Code


PRODUCT CODE

TSB-D

   D = Connection size
    160, 200, 250, 315, 400


Specifics and accessories

   CO = Colour
    W  White
    X  Special colour

Code example

   TSB-160, CO=W


Sub products

   TRI  Plenum (Diffusers)

Downloads & Media

Halton TSB - fi
Type
Datasheet
Taal
Fins (Finland)
Grote
736,2 kB
Halton TSB - se
Type
Datasheet
Taal
Zweeds (Zweden)
Grote
737,3 kB
Halton TSB - fr
Type
Datasheet
Taal
Frans (Frankrijk)
Grote
730,5 kB
Halton TSB - nl
Type
Datasheet
Taal
Nederlands (Nederland)
Grote
738,1 kB
Halton TSB - gb
Type
Datasheet
Taal
Engels (Verenigd Koninkrijk)
Grote
736,3 kB
Halton TSB - dk
Type
Datasheet
Taal
Deens (Denemarken)
Grote
737,2 kB
Halton TSB - ru
Type
Datasheet
Taal
Russisch (Rusland)
Grote
763,3 kB