TCL – Rectangular ceiling diffuser
Halton TCL is a rectangular ceiling diffuser for circular duct connection D160 mm.
Overview
- Horizontal radial air supply, suitable also for exhaust
- Specifically designed to be used in conjunction with HMC cabin unit (applicable for B-0 and B-15 installations)
- Forms an integral impression with a ceiling
- Available for installation directly through one ceiling blade
- Compact and light construction
- Detachable front plate enables cleaning of the diffuser
- Airflow is controlled via an adjusting knob installed through the diffuser
- Circular duct connection with gasket
Specification
Halton TCL is a rectangular ceiling diffuser for circular duct connection D160 mm. The diffuser is manufactured from steel and finished with epoxy paint in white RAL9003 as a standard colour. Other colours are available on request. The galvanized steel coupling sleeve is equipped with a rubber gasket compound. The diffuser has a solid front plate. The detachable front plate is fixed to the upper plate with screws; cleaning of the diffuser and cabin unit can be carried out through the diffuser. Halton TCL is especially designed for low smaller spaces and is therefore an excellent choice for crew cabins.
Dimensions and Weight
TCL general drawings
The standard weight of the TCL diffuser is 2,3 kg.
Material
| PART | MATERIAL | NOTE |
| Upper plate | Steel | – |
| Front plate | Steel | – |
| Front plate fixing screws |
Galvanized steel, NOT PAINTED |
ISO 7380-1 M5x10 |
| Coupling sleeve | Galvanised steel | Gasket |
| Duct gasket | Rubber compound | – |
| Finishing | Epoxy-painted / White RAL 9003 |
Special colours available on request |
Function
Air is supplied horizontally into the space through the side slots of the diffuser and induces the room air outside the diffuser. The recommended maximum air temperature difference between supply and room air is 10 ºC degrees.
Installation
The TCL diffuser can be connected directly to a Halton HMC cabin unit.
Servicing
Open the screws of the front panel and clean the parts by wiping with a damp cloth. Put the front panel back into the place and lock the screws.
Downloads
