Product / FDO
FDO A0(A60)防火风闸适合要求苛刻的应用
浩盾FDO防火风闸是具有型式认证的 A0（A60) 级防火风闸，广泛适用于船舶和钻井平台上的通风系统。
概览
- 经全球主要船级社型式认证：无隔热层时达到A0级，经有效隔热处理后可达A15-A60等级。
- 固定外框采用喷漆、镀锌或不锈钢材质。叶片为不锈钢或镀锌钢。可选配法兰
- 叶片内置密封件 （有效耐温达270℃）
- 熔断器额定熔断温度为50℃、74℃或100℃，可定制其他温度
- 极低泄漏率，详见下表
- 可选配自动电气、气动或弹簧驱动系统
- 风管最大设计压力5000pa，最大风速15m/s
- 风闸常规工作温度范围为-50℃至+80℃。执行器及组件选型可能影响该温度范围。其他温度范围可按要求定制
- 可提供ATEX/IECEx认证
- 特定条件下可为风闸提供SIL 2安全评估证书
尺寸和材料厚度
FDO防火风闸符合圆形风管（Ø100-500毫米）的国际标准。Ø100和Ø125规格暂不提供不锈钢材质。Ø160及以上规格可按1mm计量单位定制生产。法兰及钻孔可选配，符合ISO 15138标准。特殊法兰及钻孔可按要求定制。框架材料厚度3mm或符合SOLAS规范。叶片由两片1mm厚钢板铆接而成。
FDO总图（不带法兰）
FDO总图（带法兰）
FDO不带法兰尺寸（标准）
| FDO-EL | FDO-PNR | FDO-SP | |||||||||||||
| Damper size | Inside dimensions | Outside dimensions | Material thickness | Housing Left | Blade | Eledrive CSQP / Schischek | Belimo BF | Air Torque AT50 | Air Torque AT100 | Spring | |||||
| Ø | A | C | T | F | G | H | I | H | I | H | I | H | I | H | I |
| 100 | 100,8 | 108 | 3,6 | 200 | – | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 125 | 125 | 133 | 4 | 200 | – | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 160 | 160 | 166 | 3 | 200 | – | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 200 | 200 | 206 | 3 | 320 | – | 150 | 200 | 155 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 250 | 250 | 256 | 3 | 320 | – | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 315 | 315 | 321 | 3 | 320 | – | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 400 | 400 | 408 | 4 | 320 | 43 | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
| 500 | 500 | 508 | 4 | 320 | 93 | 150 | 200 | 115 | 200 | 145 | 215 | 165 | 215 | 150 | 115 |
FDO 带法兰尺寸 （可选配）
| FDO-EL | FDO-PNR | FDO-SP | ||||||||||||||
| Damper size | Inside dimensions | Bolt circle | Outside dimensions | Material thickness | Bolt holes | Bolt holes Qty | Housing Lenght | Blade | Eledrive CSQP / Schischek | Belimo BF | Air Torque AT50 | Spring | ||||
| Ø | A | B | C | T | D | E | F | G | H | I | H | I | H | I | H | I |
| 100 | 100,8 | 120 | 200 | 3,6 | 8,5 | 4 | 206 | – | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 125 | 125 | 150 | 225 | 4 | 8,5 | 4 | 206 | – | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 160 | 160 | 185 | 260 | 3 | 8,5 | 4 | 206 | – | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 200 | 200 | 225 | 300 | 3 | 8,5 | 4 | 326 | – | 150 | 200 | 155 | 200 | 135 | 105 | 150 | 115 |
| 250 | 250 | 280 | 350 | 3 | 12 | 4 | 326 | – | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 315 | 315 | 355 | 415 | 3 | 12 | 8 | 326 | – | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 400 | 400 | 450 | 500 | 3 | 12 | 8 | 326 | 40 | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
| 500 | 500 | 560 | 600 | 3 | 12 | 12 | 326 | 90 | 150 | 200 | 115 | 200 | 135 | 105 | 150 | 115 |
材料和表面处理
| 部件 | 材质 | 表面处理 |
| 外框 | 碳钢 | 喷漆或镀锌 |
| 外框 | 不锈钢 EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L) | – |
| 叶片 | 钢 | – |
| 叶片 | 不锈钢 EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L) | |
| 免维护轴套 | 不锈钢 EN 1.4404 (AISI316L) | – |
| 转轴 | 不锈钢 EN 1.4404 (AISI316L) | – |
产品型号和配件
浩盾FDO可配备以下执行器:
- FDO-EL: 电动弹簧复位马达；标配执行器为 24V或230V或120V。 马达包含内置限位开关。EL型配备独立接线盒。提供多种防爆执行器，可选配一秒关闭功能。
- FDO-PNR: 气动旋转执行器
- FDO-SP: 带熔断片的手动弹簧式执行器风闸
DOT: PNR和EL型号可选配手动复位功能
HSO: PNR与EL型号配备HVAC风闸智能复位功能，支持断电自动重启。一旦恢复供电或气源，系统将立即自动复位。
提供多种配件。
操作原理
当管道温度升高时：
- FDO-EL: 熔断片熔断，并切断弹簧复位马达的操作电压，允许弹簧关闭风闸叶片。更换熔断片且恢复马达的操作电压后，防火风闸自动打开。
- FDO-PNR:熔断片熔断，切断弹簧复位执行器的操作压力，允许弹簧关闭风闸叶片。更换熔断篇且重新连接气压后，防火风闸自动打开。
- FDO-SP: 熔断片熔断，允许弹簧关闭风闸叶片。更换熔断片后，防火风闸必须手动重设到打开位置。
重量
标准浩盾船舶 FDO 风闸 (kg) 重量，不带执行器
FDO 重量，不带法兰
| SIZE ØD (mm) | KG |
| 100 | 4 |
| 125 | 4,5 |
| 160 | 4,6 |
| 200 | 7,5 |
| 250 | 9 |
| 315 | 12 |
| 400 | 17 |
| 500 | 22,5 |
FDO 重量，带法兰
| SIZE ØD (mm) | KG |
| 100 | 5 |
| 125 | 5,7 |
| 160 | 6,1 |
| 200 | 9,5 |
| 250 | 11 |
| 315 | 14,5 |
| 400 | 20,1 |
| 500 | 26,3 |
执行器重量示例: FDO-EL CSQP +3,5 kg, BF230 +3,2 kg, BLF230 +1,7 kg, ExMax or Redmax or InMax +3,5 kg, FDO-PNR AT100 (AISI) +6,2 kg, AT150 (AISI) 3 kg, FDO-SP +1 kg.
安装
操作与维护手册可从Halton Marine销售办事处及经销商处获取。
产品代码
| (D)=Diameter | |||||||
| 100-500 | |||||||
| (FA)=Fire Approval | |||||||
| (C1) ABS American Bureau of Shipping | |||||||
| (C2) MED Marine Equipment Directive | |||||||
| (C3) LRS Lloyds Register | |||||||
| (C4) DNV Det Norske Veritas – GL | |||||||
| (EX)=Atex Class | |||||||
| (NA) No ATEX class (safe area) | |||||||
| (X1) EX II 2 G (Zone 1) | |||||||
| (SF)=Flange Option | |||||||
| (H0) Eurovent flange in circular connections | |||||||
| (H1) Eurovent flange + loose flange in circular connections | |||||||
| (HA) Eurovent flanges | |||||||
| (N0) ISO15138 flange drilling in circular connection | |||||||
| (N1) ISO15138 flange drilling + Loose flange in circular connection | |||||||
| (NA) Circular connections without flanges | |||||||
| (NR) ISO15138 flange drilling | |||||||
| (FS)=Frame dimensioning | |||||||
| (HS) Halton Standard dimensioning | |||||||
| (SO) SOLAS dimensioning | |||||||
| (MA)=Material | |||||||
| (CS) Carbon steel | |||||||
| (SS) Stainless steel EN1.4301 | |||||||
| (AS) Stainless steel EN1.4404 | |||||||
| (LS) Stainless steel EN1.4432 | |||||||
| (FM)=Frame Material | |||||||
| (A3) Stainless steel (3.0) EN1.4404 | |||||||
| (A4) Stainless steel (4.0) EN1.4404 | |||||||
| (C3) Carbon steel (3.0) | |||||||
| (C4) Carbon steel (4.0) | |||||||
| (L3) Stainless steel (3.0) EN1.4432 | |||||||
| (L4) Stainless steel (4.0) EN1.4432 | |||||||
| (S3) Stainless steel (3.0) EN1.4301 | |||||||
| (S4) Stainless steel (4.0) EN1.4301 | |||||||
| (FI)=Finishing | |||||||
| (NA) Not Assigned (acid treatment) | |||||||
| (PN) Painting | |||||||
| (PX) Special Painting C5-M ISO12944 | |||||||
| (HG) Hot galvanized | |||||||
| (RE)=Actuator | |||||||
| (S1) Spring | |||||||
| (P0) Pneumatic – Air Torque, AT101, Aluminium | |||||||
| (P3) Pneumatic – Air Torque, AT104, AISI316 | |||||||
| (E7) Electric BF120 -2 -HL | |||||||
| (Z3) Ex proofed ExMax 5.10 SF | |||||||
| (Z2) Ex proofed ExMax 15 SF | |||||||
| (R2) Ex proofed RedMax 15-SF | |||||||
| (I1) InMax 15-SF | |||||||
| (E3) Electric BF230-2-HL | |||||||
| (E1) Electric BF24-2-HL | |||||||
| (L1) Electric BLF24-HL | |||||||
| (L5) Electric BLF230-HL | |||||||
| (C1) Electric CSQP-05A1E 24V | |||||||
| (C2) Electric CSQP-05A2E 120/230V | |||||||
| (C3) Electric CSQP-10A1E 24V | |||||||
| (C4) Electric CSQP-10A2E 120/230V | |||||||
| (C5) Electric CSQP-15A1E 24V | |||||||
| (C6) Electric CSQP-15A2E 120/230V | |||||||
| (Q3) Pneumatic Rot AT051, AL | |||||||
| (Q4) Pneumatic Rot AT054, AISI316 | |||||||
| (FU)=Fuse | |||||||
| 144 °C | |||||||
| 100 °C | |||||||
| 95 °C | |||||||
| 74 °C | |||||||
| 72 °C | |||||||
| 70 °C | |||||||
| 65 °C | |||||||
| 50 °C | |||||||
| (AC)=Accessories | |||||||
| (E1) Junction box, plastic IP65 : | |||||||
| (E2) Ex proofed junction box, IP65, T6 : | |||||||
| (L1) Limit switch, 1 pcs IP66 : | |||||||
| (L2) Limit switch, 2 pcs IP66 : | |||||||
| (L3) Ex proofed limit switch, 1 pcs IP65 : | |||||||
| (L4) Ex proofed limit switch, 2 pcs IP65 : | |||||||
| (M1) Solenoid valve 24 VDC : | |||||||
| (M2) Solenoid valve 230 VAC : | |||||||
| (M3) Ex Solenoid valve 24 VDC (Brass) (Norgren) | |||||||
| (M4) Ex solenoid valve 230 VAC (SS) (Norgren) | |||||||
| (P1) Pneumatic valve, manual | |||||||
| (S3) SN2 auxiliary switch | |||||||
| (ST) Stainless steel tubing | |||||||
| Code example | |||||||
| FDO-100,FA=C2,SF=HA,FS=SO,MA=CS,FM=C3,FI=PN,RE=C2,FU=50,ZT=N,AC=L1 | |||||||
Downloads
-
Halton FDO datasheet 2025
Data
English -
Halton FDO datasheet 2020 – Chinese
Data
Chinese -
ABS Certificate for Halton FDO
Data
English -
DNV Certificate for Halton FDO
Data
English -
EAC Certificate for Halton FDA, FDB2, FDO, FDH, FCE, UTA, UTG, BDH, BRD, BLD
Data
Русский (ru) -
MED BV Certificate for Halton FDO
Data
English -
Halton Marine Oy MED Quality System Module D Certificate
Data
English -
SIL 2 Safety Assessment Certificate
Data
English -
ATEX Certificare for FDB2, FDL, FDO, FDA
Data
English
"*" indicates required fields
