概览
- 风雨密盖可与 Halton Marine 气水分离器、百叶窗和调节阀配合使用
- 易于打开和关闭
- 易于安装
- 无需特殊维护
- 可变的打开位置
- 可锁定
- 可自定义尺寸和模块化设计
- 标配为不锈钢,可选配喷漆钢
Dimensions and Material Thickness
WTH hatches are manufactured for rectangular openings (width B 100-1200 mm and height H 100-1200 mm, with 1 mm division). Modular construction for larger sizes is available. Cover thickness (C) is minimum 34 mm, but is variable by material thickness.
Hatch opening
Option 1. Hatch opening in different angle based on customer requirement (picture on the left). Option 2. Hatch opening 180 degrees with mounting brackets (picture on the right).
Material and Finishing
PART | MATERIAL | FINISHING | NOTE |
Hatch cover | Steel | Painted* or galvanised | Thickness depends on size of the hatch |
Hatch cover | Stainless steel EN 1.4404 (AISI316L) | – | Thickness depends on size of the hatch |
Hatch frame | Steel | Painted* or galvanized | Frame material thickness 2.0 mm as standard |
Hatch frame | Stainless steel EN 1.4404 (AISI316L) | – | Frame material thickness 2.0 mm as standard |
*) C2 average service life 5 years. C5-M with average service life of 10 years available as an option.
Installation
Halton WTH can be fitted with Halton Marine droplet separators, louvres and dampers.
Installation with Halton Marine DSH droplet separator
Installation with Halton Marine USM external louvre
Installation with Halton Marine DSH droplet separator and UTG damper
Downloads
Contact Us
"*" indicates required fields