Brandschutzklappen und -ventile

CFD-02TM – Tunnelklappe für hohe Temperaturen

The type CFD-02TM High temperature tunnel damper has been designed for bolting / clamping directly onto walls and floors or bolting to steel support frames / ductwork.

FCE – Brandschutzklappe (EI 60 S)

Excellent choice for industrial ventilation systems. Halton FCE fire dampers are CE-marked according EN 15650:2010 and tested according to EN 1366-2 standard. Available also as ATEX approved as an option.

FDO – A60(A60) Brand- und Gasschutzklappe

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FDB2 – A0(A60) Brand- und Gasschutzklappe

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

CFD-01-ICB – EI120S Insulated fire damper

The CFD-01-ICB Fire Damper is a High Integrity insulated Fire Damper used to prevent the spread of flame, smoke and heat through a HVAC system, in the event of a fire.

CFD-01 – A0 (A60) E120S Fire damper

Designed to operate in the most arduous conditions and extremes of climate and temperature, Flamgard Calidair dampers have a proven record of reliability and high performance across multiple industries.

FDK – A0(A60) Fire damper

Halton FDK A0(A60) fire dampers are developed to be used in ferries and yachts where lightweight equipment are preferred.

Halton FDV – Fire valve (E 120 S)

Basic valve look, effective function. Easy to install.

Halton FDT – Fire damper (EI 60 S)

This CE marked fire damper (EI 60 S) needs no spare parts or additional installation frames, regardless of the wall type.

FDL – A0(A60) Fire damper

Excellent choice for marine ventilation systems. Available also as ATEX approved as an option.

Halton FDI – Fire damper (EI 60 S)

This CE marked, already well known fire damper is a familiar member of our Fire safety family.

FDH – H0(H120) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FDA – A0(A60) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FD-CON-A – Fire damper control unit

For Halton Marine fire dampers

• Single or multiple controllers per damper with easy jumper based master/slave configuration
• LED lights indicate the damper open, middle and closed positions

FD-CON-2 – Fire damper control unit

For Halton Marine fire dampers

• Single or multiple controllers per damper with easy jumper based master/slave configuration
• LED lights indicate the damper open and closed positions

Halton Exe ETR – Fire damper (EI 120 S)

This is one of the largest rectangular CE marked fire damper in the market. Minimum free space around its body is needed in case of installation.

Halton Exe ETC – Fire damper (EI 120 S)

Installation option up to 1.0 meter away from the structure (EI 90 S) has been certified.

Halton Exe ESR – Fire damper (EI 120 S)

Installation option up to 1.0 meter away from the structure (up to EI 90 S) has been certified.

Halton Exe ESC – Fire damper (EI 120 S)

Installation option up to 1.0 meter away from the structure (EI 90 S) has been certified.

Halton Exe ELR – Fire damper (E 120 S)

This non-insulated CE marked blade type of fire damper model is one of the shortest in the market. 

Halton Exe ELC – Fire damper (E 120 S)

This non-insulated CE marked fire damper is one of the shortest in the market and so utilising minimal space.

Halton Exe EFC – Fire damper (EI 120 S)

This fire damper can be installed inside the duct near with e.g. supply or exhaust valve.

Halton Exe EDC – Fire damper (EI 120 S)

Installation option up to 1.0 metre away from the structure (up to EI 90 S) has been certified.