Halton Vita VLR – Room airflow controller for Halton Vita Lab solutions
The Halton Vita VLR airflow controller operates as a fundamental element of the supply and exhaust ductwork in the Halton Vita Lab solution.
Halton Max MLC – Airflow management damper
The Halton Max MLC airflow management damper can be installed without safety distances in all installation cases.
Halton Max MOC – Airflow management damper
Circular airflow management damper for a wide variety of standard VAV applications. Quick and easy commissioning.
UTA – Gasdichte Absperrklappe
Halton UTA dampers are used to shut-off and balance airflow rates in high pressure ductwork. Frame thickness 3 or 5 mm. Available also as ATEX approved as an option.
UTP – Ausgleichsklappe
Halton UTP dampers are used to balance airflow rates in high pressure ductwork. Frame thickness 3. 5 mm or thicker available as an option. Available also as ATEX approved as an option.
CID-01 – Isolationsklappe ohne Leckage
The type CID-01 Isolation Damper has been specifically designed to meet the tightest shut- off requirements of the industrial and nuclear markets, where isolation of ducting for filter replacement or duct inspection is required, without shutting down complete systems.
Halton Max MDC – Zone control damper for Halton Workplace system
Fundamental element of the supply and exhaust ductwork zones in the Halton Workplace system.
KBD – Exhaust hood balancing damper (ETL)
UL Listed – The KBD exhaust hood balancing damper allows for multiple hoods connecting to a common exhaust duct to be balanced both accurately and simply while ensuring the proper exhaust airflow for capture and containment of cooking effluent for each hood section.
ABD – Automated Balancing Damper for kitchen ventilation (CE)
CE marked (UKCA pending) – The ABD balancing dampers are a vital component of M.A.R.V.E.L. energy saving technology for commercial kitchens. They are used to automatically adjust in real-time the exhaust airflow rates depending on the cooking activity. This feature allows for independent adjustment of each Capture Jet™ hood section or area of ventilated ceiling tied to a common duct and fan system.
Halton UTK – Jalousieklappe
Available in various rectangular modular sizes. The shut-off tightness is class 1 according to EN 1751.
- Shut-off, adjustment, balancing, adjustment or control damper with opposed blade construction
- Tightness in closed position fulfills EN 1751 class 1 requirements
UTG – Gastight shut-off damper
Halton UTG dampers are used to shut-off and balance airflow rates in high pressure ductwork. Frame thickness 3 mm. 5 mm or thicker available as an option. Available also as ATEX approved as an option.