Hyppää sisältöön
FDA A0(A60) fire and gas damper
FDA A0(A60) fire and gas damper
FDA A0(A60) fire and gas damper

FDA – A0(60) Kaasutiivis palopelti

Halton FDA fire and gas damper – a new tighter fire and gas damper.

Overview

  • Type-approved fire damper by most recognized classification societies: A0 without insulation, A-15 to A-60 when suitably insulated
  • Available as ATEX certified
  • Blades contain stainless steel spring seals for low leakage in normal conditions and thermal expansion graphite seals (effective from 150ºC) to seal the damper in case of fire. Silicon sealing as an option.
  • Closed damper fulfills the requirement of leakage class 3 (EN1751:2014) > 300×300 mm and for size > 200×200 mm (silicon seals). Casing leakage class C.
  • Nominal strip fuse release temperature 50ºC, 74ºC or 100ºC. Other temperatures available.
  • Nominal glass bulb fuse release available as an option with temperatures 68ºC or 93ºC. Other temperatures available
  • Low weight due to double skin blade structure
  • Electrical or pneumatic operation system available
  • Maximum duct pressure for damper construction 5000 Pa and maximum air velocity 15 m/s
  • Normal operation temperature for damper between -50ºC to +80ºC. Actuator and component selection can have an effect on this temperature range. Other temperatures available on request.

Specification

Halton FDA fire dampers are type-approved class A0(A60) fire and gas dampers for use in offshore, marine and navy ventilation systems. The FDA can be installed in rectangular or circular ducts. All fire dampers have a fusible link and they prevent the spread of fire and gases within the ventilation ductwork. When the blades are in the open position, the device does not cause significant pressure loss, noise or flow disturbance. An open-closed indicator is visible on the outside of the damper. Fire dampers with non-standard dimensions can be supplied on request.

Dimensions and Material Thickness

FDA fire dampers meet international standards for both rectangular (width B 200-1200 mm with 25 mm division and height H 200-1600 mm with 50 mm division) and circular ducts (Ø200-1250 mm). Modular constructions up to 2500×2600 mm available.
Non-standard dimensions and flange drilling available on request. Standard flanges and drilling according to ISO 15138 standards. Frame thickness 3 mm or 3-5 mm according to SOLAS.
Blades are made of two sheets, each of them being 1 mm thick (sandwich design).

Frame thickness according to SOLAS

DIMENSIONS S
If B or H > 100, but < 449 3
If B or H > 450 but < 649 4
If B or H > 650 5

Frame thickness according to SOLAS, Edition Dec. 2015

DIMENSIONS S
If A < 0.075 m2 3
If A > 0.075 and A < 0.45 m2 4
If A > 0.45 m2 5

Flange dimensions according to ISO 15138

DIMENSIONS ØC F P1 P2 BM
If longest side < 350 10 40 75…150 75…150 20
If longest side 351…1000 12 50 75…150 75…150 30
If longest side > 1001 14 80 75…150 75…150 40

Circular flange dimensions according to ISO 15138

DIMENSIONS ØC F
If Ø D < 355 10 40
If Ø D 356…1000 12 50
If Ø D > 1001 14 80

FDA, General Drawings

Actuator J K T
AT100 430 150 145
AT100 + Halton smart override 510 150 255
AT200 510 150 165
AT200 + Halton smart override 510 150 275
AT300 510 180 190
AT300 + Halton smart override 510 180 300
Belimo BF 430 150 125
Belimo BF (Damper height<200) 430 90 125
Schischek S 430 150 145
Schischek S (Damper height<200) 430 90 145
Schischek S + Halton smart override 440 220 235
Schischek M 510 150 175
Schischek M + Halton smart override 440 220 165
H
Normal height
HF
Free height
M
Drive
200 200 100
250 250 125
300 250 125
350 250 125
400 400 100
450 450 125
500 500 125
550 500 125
600 600 100
650 650 125
700 700 125
750 750 125
800 800 100
850 850 125
900 900 125
950 950 125
1000 1000 125
1050 1050 125
1100 1100 125
1150 1150 125
1200 1200 125
1250 1250 125
1300 1300 125
1350 1350 125
1400 1400 125
1450 1450 125
1500 1500 125
1550 1500 125
1600 1500 125
Material
Thickness
Depth
5 L
3 270
5 275

Nominal
duct size (Ø D)
Bolt circle (Ø E) Bolt hole size No. of bolts
100 145 10 4
125 170 10 4
150 195 10 4
160 205 10 4
200 245 10 8
250 295 10 8
275 320 10 8
300 345 10 8
315 360 10 8
355 400 10 8
400 459 12 8
450 509 12 12
500 559 12 12
560 619 12 12
600 659 12 16
630 689 12 16
700 759 12 16
710 769 12 16
800 859 12 24
900 959 12 24
1000 1059 12 24
1120 1209 14 24
1200 1289 14 32
1250 1339 14 32
1400 1489 14 32

Material and Finishing

PART MATERIAL FINISHING
Frame Carbon steel Painted or galvanised
Frame Stainless steel EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L) Painted as an option
Blades Steel Galvanised
Blades Stainless steel EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L)  –
Maintenance-free bearings Oil bronze. Stainless steel EN 1.4404 (AISI316L) available as an option.  –
Shafts Stainless steel EN 1.4404 (AISI316L)  –

Product Models and Accessories

Halton FDA is available with following actuators:

  • FDA-EL: Electrical spring return actuator; standard actuators being 24 VAC/DC or  230 VAC or 120 VAC. Depending on the choice of actuator, the actuator might contain built-in open-closed limit switches. Separate junction box included in the EL-model. A wide range of Ex actuators available, including a one second closing time function as an option.
  • FDA-PNR: Pneumatic rotating actuator
HSO: Halton Smart Override function for HVAC damper black-start available for PNR and EL models. With automatic reset function when power and/or pneumatic air supply is reinstated.
A wide range of accessories available.

Operation principles

In the event of a temperature rise in ductwork:

  • FDA-EL: fusible link releases and cuts off operating voltage to the spring return motor, allowing the spring to close the damper blades. The fire damper opens automatically when the fuse has been changed and the operating voltage to the motor is re-established.
  • FDA-PNR: fusible link releases and cuts off operating pressure to the spring return actuator, allowing springs to close the damper blades. The fire damper opens automatically when the fuse has been changed and the pneumatic air supply is re-established.

Weights

Weights of standard FDA dampers without actuator (KG). Frame thickness 3 mm.

H/Height 

(mm)

 B/Width (mm)
200 300 400 500 600 700 800 900 1000 1100 1200
200 18 20 23 26 29 32 35 38 40 43 46
300 21 24 27 29 32 35 38 41 44 47 49
400 26 29 33 36 39 42 46 49 52 56 59
500 30 33 36 40 43 46 50 53 56 59 63
600 35 39 42 46 50 54 57 61 65 69 72
700 39 42 46 50 54 57 61 65 69 72 76
800 44 48 52 56 60 65 69 73 77 81 86
900 47 52 56 60 64 68 73 77 81 85 89
1000 51 55 60 64 68 72 76 81 85 89 93
1100 56 61 66 70 75 80 84 89 93 98 103
1200 60 65 69 74 79 83 88 93 97 102 106
1300 65 70 75 80 86 91 96 101 106 111 116
1400 69 74 79 84 89 94 99 105 110 115 120
1500 73 78 83 88 93 98 103 108 113 119 124
1600 76 82 87 92 97 102 107 112 117 122 127

Approximate weights without an actuator. Flanges according to ISO 15138.

Weights of standard FDA dampers without actuator (KG). Frame thickness according to SOLAS (based on longest duct model).

H/Height 

(mm)

 B/Width (mm)
200 300 400 500 600 700 800 900 1000 1100 1200
200 18 21 24 31 34 43 48 52 56 60 65
300 21 24 27 35 38 48 52 57 61 65 69
400 26 30 33 42 46 57 62 66 71 76 80
500 34 38 42 46 50 62 67 72 76 81 86
600 40 45 49 54 48 71 76 81 86 92 97
700 50 56 61 66 71 76 81 87 92 97 102
800 57 63 68 74 79 85 91 96 102 107 113
900 62 68 73 79 85 90 96 101 107 113 118
1000 68 73 79 84 90 95 101 107 112 118 123
1100 74 80 86 92 98 104 110 116 122 128 134
1200 79 85 91 97 103 110 116 122 128 134 140
1300 86 92 99 105 112 118 125 131 138 144 151
1400 91 98 104 111 117 124 130 137 143 150 156
1500 96 103 109 116 122 129 135 142 148 155 161
1600 102 108 115 121 128 134 141 147 154 160 166

Approximate weights without an actuator. Flanges according to ISO 15138.

Weights of standard FDA dampers without actuator (KG). Frame thickness according to SOLAS Edition Dec. 2015 (based on duct cross-section area).

H/Height

mm

 B / Width (mm)
200 300 400 500 600 700 800 900 1000 1100 1200
200 18 21 27 31 34 38 41 45 48 52 55
300 21 28 31 35 38 42 45 49 52 56 60
400 30 34 38 42 46 50 54 58 62 66 80
500 34 38 42 46 50 54 58 62 76 81 86
600 40 45 49 54 58 62 76 81 86 92 97
700 45 49 54 58 63 76 81 87 92 97 102
800 51 56 60 65 79 85 91 96 102 107 113
900 55 60 65 70 85 90 96 101 107 113 118
1000 60 65 70 84 90 95 101 107 112 118 123
1100 66 71 76 92 98 104 110 116 122 128 134
1200 70 75 91 97 103 110 116 122 128 134 140
1300 76 82 99 105 112 118 125 131 138 144 151
1400 80 86 104 111 117 124 130 137 143 150 156
1500 85 91 109 116 122 129 135 142 148 155 161
1600 90 108 115 121 128 134 141 147 154 160 166

Approximate weights without an actuator. Flanges according to ISO 15138.

Pneumatic actuators for FDA according to size of the damper

H/Height
(mm)
B/Width (mm)
200 300 400 500 600 700 800 900 1000 1100 1200
200 AT100 AT100 AT100 AT100 AT100 AT100 AT200 AT200 AT200 AT200 AT200
300 AT100 AT100 AT100 AT100 AT100 AT100 AT200 AT200 AT200 AT200 AT200
400 AT100 AT100 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT200 AT200
500 AT100 AT100 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT200 AT200
600 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT200 AT200 AT300 AT300
700 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT200 AT200 AT300 AT300
800 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300
900 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300
1000 AT100 AT100 AT200 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300
1100 AT100 AT200 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300
1200 AT100 AT200 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300
1300 AT100 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300 AT300
1400 AT100 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300 AT300
1500 AT100 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300 AT300
1600 AT100 AT200 AT200 AT200 AT200 AT300 AT300 AT300 AT300 AT300 AT300

Approximate weights of pneumatic rotary actuator Air Torque. FDA-PNR AT101 as aluminium +1,8 kg, AT104 as stainless steel 4,0 kg, AT201 as aluminium +3,2kg, AT204 as stainless steel +6,4 kg, AT301 as aluminium +6,0 kg, AT304 as stainless steel +13,3 kg.
Other actuators available on request.

Electrical actuators for FDA according to size of the damper

 H/Height (mm)  B/Width (mm)
200 300 400 500 600 700 800 900 1000 1100 1200
200 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
300 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
400 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
500 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
600 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
700 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF
800 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
900 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1000 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1100 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1200 Ex/Inmax-15-SF Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1300 Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1400 Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1500 Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF
1600 Ex/Inmax-15-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-30-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF Ex/Inmax-50-SF

Electric rotary actuator Schischek ExMax or InMax

ACTUATOR OPTIONS CLOSING TIME MATERIAL WEIGHT (APPR.)
Ex/InMax-15-SF 3 seconds Aluminium 3,5 kg
Ex/InMax-15-SF 3 seconds Stainless steel 7,0 kg
Ex/InMax-15-SF1 1 second Aluminium 3,5 kg
Ex/InMax-15-SF1 1 second Stainless steel 7,0 kg
Ex/InMax-30-SF3 3 second Aluminium 9,5 kg
Ex/InMax-50-SF3 3 second Aluminium 9,5 kg

Installation

Installation on wall or roof.
At wall installation the blade orientation must always be in horizontal plane.

Installation and maintenance instructions are with each fire damper delivery. Copies of Operation and Maintenance manuals are available from Halton Marine Sales offices and distributors.

Product Code

(S)=Shape of Connection
(A) Circular (D1)
(C ) Circular (D2)
(R) Rectangular

(W)=Width
200-1200
step 25 mm

(H)=Height
200-1600
step 50 mm

(D)=Diameter
200-1200
step max(step W, step H) = step H = 50 mm

Specifics and accessories

(EX)=Atex Class
(NA) No ATEX class (safe area)
(X1) EX II 2 G (Zone 1)

(SF)=Flange Option
(N0) Connection flange in circular connections ISO15138
(N1) Connection + loose flange in circular connections ISO15138
(NA) Not Assigned (circular connection)
(NR) Flanges (2 sides) ISO15138

(FS)=Frame Dimensioning
(N0) Connection flange in circular connections ISO15138
(N1) Connection + loose flange in circular connections ISO15138
(NA) Not Assigned (circular connection)
(NR) Flanges (2 sides) ISO15138

(MA)=Material
(AS) Stainless steel (1.0) EN1.4404
(CS) Carbon steel (1.0)
(LS) Stainless steel (1.0) EN1.4432
(SS) Stainless steel (1.0) EN1.4301

(FM)=Frame Material
(A3) Stainless steel (3.0) EN1.4404
(A3) Stainless steel (4.0) EN1.4404
(A3) Stainless steel (5.0) EN1.4404
(C3) Carbon steel (3.0)
(C4) Carbon steel (4.0)
(C5) Carbon steel (5.0)
(L3) Stainless steel (3.0) EN1.4432
(L4) Stainless steel (4.0) EN1.4432
(L5) Stainless steel (5.0) EN1.4432
(S3) Stainless steel (3.0) EN1.4301
(S4) Stainless steel (4.0) EN1.4301
(S5) Stainless steel (5.0) EN1.4301

(FI)=Finishing
(HG) Hot galvanized
(NA) Not Assigned (acid treatment)
(PN) Painting
(PX) Special Painting C5-M ISO12944

(BM)=Bearing Material
(BR) Phosphor-bronze-iolite
(AS) Stainless steel EN1.4404

(IN)=Insulation
(N) No insulation
(Y) Insulation

(RE)=Actuator
(I1) InMax 15-SF
(I2) InMax 15-SF VAS
(I3) InMax 15-SF1 VAS
(I5) InMax 30-SF3
(I6) InMax 15-SF1
(I7) InMax 50-SF3
(P0) Pneumatic – Air Torque, AT101, Aluminium
(P3) Pneumatic – Air Torque, AT104, AISI316
(P4) Pneumatic – Air Torque, AT201 FA, Aluminium
(P5) Pneumatic – Air Torque, AT204 FA, AISI316
(Q5) Pneumatic -Air Torque, AT301 FA, Aluminium
(Q6) Pneumatic – Air Torque, AT304 FA, AISI316
(Q7) Pneumatic – Air Torque, AT351 FA, Aluminium, Module
(Q8) Pneumatic – Air Torque, AT404 FA, AISI316, Aluminium, Module
(U0) Pneumatic – Air Torque, AT301 FA STR, Aluminium
(U1) Pneumatic – Air Torque, AT304 FA STR, AISI316
(U2) Pneumatic – Air Torque, AT351 FA STR, Aluminium, Module
(U3) Pneumatic – Air Torque, AT404 FA STR,  AISI316, Module
(Z2) Ex-proofed ExMax 15-SF
(Z4) Ex-proofed ExMax 15-SF VAS
(Z5) Ex-proofed ExMax 15-SF1 VAS
(Z7) Ex-proofed ExMax 15-SF1
(Y1) Ex-proofed ExMax 30-SF3
(Y3) Ex-proofed ExMax 50-SF3

(FU)=Fuse
144 °C
100 °C
95 °C
74 °C
72 °C
70 °C
65 °C
50 °C

(AC)=Accessories
(L2) Limit switch 2 pcs IP65 (Plastic) (Bernstein)
(L4) EX Limit switch 2 pcs (Plastic) (Bartec)
(L5) EX Limit switch 4 pcs (Plastic) (Bartec)
(L6) EX Magnetic switch 2 pcs (AISI6118) (Elobau)
(L7) EX Magnetic switch 4 pcs (AISI6118) (Elobau)
(M1) Solenoid valve 24 VDC (Aluminium)  (SMC)
(M2) Solenoid valve 230 VAC (Aluminium) (SMC)
(M3) EX solenoid valve 24 VDC (Brass) (ASCO)
(M4) EX solenoid valve 230 VAC (SS) (ASCO)
(M5) EX solenoid valve 24 VDC (AISI316) (Bifold)
(P1) Pneumatic valve manual (Aluminum) (SMC)
(P2) Pneumatic valve manual (AISI316) (Bifold)
(SC) Stainless steel cover box (Steel) (Halton)
(ST) Stainless steel tubing (AISI316) (Halton)
(O1) Halton Smart Override, manual EL Ex/InMax S-serie
(O2) Halton Smart Override, manual PN AT100, 200
(O3) Halton Smart Override, manual PN AT300, 350, 400
(O4) Halton Smart Override, manual EL Ex/InMax M-serie

Code example
FDA/R-1200-1600,EX=X1,SF=NR,FS=SO,MA=CS,FM=C5,FI=HG,BM=AS,IN=N,RE=P4,FU=74,ZT=Y,AC=E2,L8,M4,SC,O2

Lataukset

FDA – A0(A60) Fire and gas damper
Data
en
FDA – A0(60) Kaasutiivis palopelti
Data
fi
FDA – A0(A60) Fire and gas damper
Data
fr
Halton FDA datasheet 2021
Datasheet
English
581.15 KB
Halton FDA datasheet 2020 – Chinese
Datasheet
Chinese
1,008.00 KB
ABS Certificate for Halton FDA
Certificate
English
50.35 KB
LR Certificate for Halton FDA
Certificate
English
189.01 KB
DNV GL Certificate for Halton FDA
Certificate
English
1.48 MB
LR Transport Canada Certificate for Halton FDA
Certificate
English
189.51 KB
MED BV Certificate for Halton FDA
Certificate
English
535.47 KB
RMRS Certificate for Halton FDA
Certificate
Русский (ru)
386.59 KB
ATEX Certificare for FDB2, FEX, FDL, FDO, FDA
Certificate
English
223.62 KB
EAC Certificate for Halton FDA, FDB2, FDO, FDH, FCE, UTA, UTG, BDH, BRD, BLD
Certificate
Русский (ru)
2.77 MB

Request for Quotation

  • Max. file size: 16 MB.

Search