Brand- och brandgasspjäll

Halton Exe EFC – Brand/brandgasspjäll (EI 120 S)

Detta brand/brandgasspjäll kan installeras inuti en kanal i närheten med t.ex. tillufts- eller frånluftsventil.

Halton Exe ETR – Brand/brandgasspjäll (EI 120 S)

Detta är ett av de största rektangulära, CE-märkta brand/brandgasspjällen på marknaden. Minimalt ledigt utrymme krävs kring höljet vid installation.

Halton Exe ETC – Brand/brandgasspjäll (EI 120 S)

Installationsalternativ har certifierats upp till 1,0 meter från strukturen (EI 90 S).

Halton Exe ESC – Brand/brandgasspjäll (EI 120 S)

Installationsalternativ har certifierats upp till 1,0 meter från strukturen (EI 90 S).

Halton Exe ELR – Brandgasspjäll (E 120 S)

Detta oisolerade CE-märkta brandgasspjäll med blad är ett av de kortaste på marknaden.

Halton Exe ELC – Brandgasspjäll (E 120 S)

Detta oisolerade CE-märkta brandgasspjäll är ett av de kortaste på marknaden och kräver därför minimalt utrymme.

Halton Exe EDC – Brand/brandgasspjäll (EI 120 S)

Installationsalternativ upp till 1,0 meter från strukturen (upp till EI 90 S) har certifierats.

Halton FDV – Brandventil (E 120 S)

Typgodkänd och uppfyller kraven i normerna EN 1366-2 och EN 13501-3.

Halton FDT – Brand/Brandgasspjäll (EI 60 S)

Produkten är CE-märkt och tillverkas i storlekarna 200×200 till 2100×1000 mm

Halton FDS – Brandgasspjäll (E 60)

Produkten avslutad 1.5.2022
-> kommer ersättas av Halton Exe Light Rectangular (ELR)

Halton FDI – Brand-/Brandgasspjäll (EI 60 S)

Produkten är CE Märkt och tillverkas i storlekarna 100-630 mm.

CFD-02TM – High temperature tunnel damper

The type CFD-02TM High temperature tunnel damper has been designed for bolting / clamping directly onto walls and floors or bolting to steel support frames / ductwork.

CFD-01-ICB – EI120S Insulated fire damper

The CFD-01-ICB Fire Damper is a High Integrity insulated Fire Damper used to prevent the spread of flame, smoke and heat through a HVAC system, in the event of a fire.

CFD-01 – A0 (A60) E120S Fire damper

Designed to operate in the most arduous conditions and extremes of climate and temperature, Flamgard Calidair dampers have a proven record of reliability and high performance across multiple industries.

FDK – A0(A60) Fire damper

Halton FDK A0(A60) fire dampers are developed to be used in ferries and yachts where lightweight equipment are preferred.

FDO – A0(A60) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FDL – A0(A60) Fire damper

Excellent choice for marine ventilation systems. Available also as ATEX approved as an option.

FDH – H0(H120) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FDB2 – A0(A60) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FD-CON-A – Fire damper control unit

For Halton Marine fire dampers

• Single or multiple controllers per damper with easy jumper based master/slave configuration
• LED lights indicate the damper open, middle and closed positions

FDA – A0(A60) Fire and gas damper

Excellent choice for offshore, marine and navy ventilation systems. Available also as ATEX approved as an option.

FD-CON-2 – Fire damper control unit

For Halton Marine fire dampers

• Single or multiple controllers per damper with easy jumper based master/slave configuration
• LED lights indicate the damper open and closed positions

FCE – Fire damper (EI 60 S)

Excellent choice for industrial ventilation systems. Halton FCE fire dampers are CE-marked according EN 15650:2010 and tested according to EN 1366-2 standard. Available also as ATEX approved as an option.

Halton Exe ESR – Fire damper (EI 120 S)

Installation option up to 1.0 meter away from the structure (up to EI 90 S) has been certified.