JRF - Floor diffuser

Rectangular diffuser for floor installation

Rectangular diffuser creating comfortable environments for the end user in demanding acoustic spaces.

  • Vertical air supply
  • Designed for use in auditoriums, theatres, concert halls, classrooms etc.
  • Comfortable thermal and good acoustic conditions
  • Integrated installation to the floor within the riser of the step
  • Ducted or connected to pressurized under-floor plenum chamber
  • Pressure drop of the diffuser enables self-balancing in most cases
  • Very limited distance between diffuser and seat required
  • Detachable front module enables cleaning of the diffuser

The casing shall be made of galvanised steel.
The front panel shall be made of galvanised steel epoxy-painted to black (RAL 9005) colour.
The perforated plate inside the casing shall create sufficient pressure drop to enable self-balancing in applications with a pressurised plenum chamber.
The diffuser shall have a swirl air jet supply pattern.
Sound attenuation material within the casing shall be made of mineral wool.

Overview

Halton JRF

Floor Diffuser
 


 

  • Vertical air supply
  • Designed for use in auditoriums, theatres, concert halls, classrooms etc.
  • Comfortable thermal and good acoustic conditions
  • Integrated installation to the floor within the riser of the step
  • Ducted or connected to pressurized under-floor plenum chamber
  • Pressure drop of the diffuser enables self-balancing in most cases
  • Very limited distance between diffuser and seat required
  • Detachable front module enables cleaning of the diffuser

Dimensions

Dimensions


Halton JRF

 


 

NS L L1
330x130 330 300
430x130 430 400


Material

Material


Halton JRF 

 Part  Material  Finishing
 Casing  Galvanised steel  
 Front panel  Galvanised steel  Epoxy-painted, Black (RAL 9005)
 Sound attenuation material  Mineral wool  


Function

Function


Halton JRF 



Halton JRF floor diffusers are designed for under-floor air distribution systems.
Air is supplied into the space through the front panel where it mixes efficiently with room air due to the swirl jet air pattern.

The perforated plate inside the casing creates sufficient pressure drop to enable self-balancing system in ductless applications.
The recommended pressure level in the plenum chamber is 30 … 40 Pa.

The recommended supply air temperature is max. 3.5 °C lower than the room temperature.
The supply airflow rate per unit is 14 … 18 l/s.
 

System Design


FLOOR SUPPLY SYSTEM DESIGN

The JFR floor diffusers are designed for installation within the riser of a step in auditoriums, concert halls, theatres, where a high level of comfort and conveyance is required. Supply air velocity must be very low to reduce discomfort that may be felt in the near zone. We recommend designing as a displacement system with a maximum supply temperature of 3,5 ° C below room. Supply 14 to 18 l/s per unit and allow a distance between outlets of 0.8 to 1 meter. Where comfort requirements are less important, higher airflow rates can be used, generating increased velocities close to the diffuser. Discomfort may be felt if exposed for an extended period of time. In this case outlets should be installed at least 1.5 m from the work place or other continuously occupied areas.

Connection of the diffusers

The JRF is suitable for installations without ductwork connections (figure 1).
The space beneath the raised floor is used as a distribution plenum chamber. Construction includes an acoustic plenum with perforated cylinder, which causes an efficient pressure loss and provides a self-balancing system.
We recommend designing the system so that the pressure inside the plenum chamber will be 30 … 40 Pa.
Where the plenum chamber has a large volume, we recommend the use of multiple air introduction points.


Figure 1

Measurements


VELOCITY AND TEMPERATURE MEASUREMENT



JRF-330x130
Airflow rate qv             14 l/s (50 m³/h)
Supply temperature  21,5 °C
Room temperature   25    °C
ΔT                                 - 3,5 °C
 

HEIGHT
mm
1 2 3 4 5
400 0.12 m/s
24.2°C
0.12 m/s
24.5°C
0.11 m/s
24.1°C
0.11 m/s
24.2°C
0.12 m/s
24.2°C
250 0.11 m/s
24.4°C
0.11 m/s
24.7°C
0.13 m/s
24.1°C
0.14 m/s
24.2°C
0.11 m/s
24.3°C
100 0.17 m/s
23.5°C
0.13 m/s
23.9°C
0.19 m/s
24.1°C
0.13 m/s
23.8°C
0.16 m/s
23.6°C


JRF-430x130
Airflow rate qv             18 l/s (65 m³/h)
Supply temperature  21,5 °C
Room temperature   25    °C
ΔT                                 - 3,5 °C
 

HEIGHT
mm
1 2 3 4 5
400 0.13 m/s
24.2°C
0.13 m/s
24.3°C
0.12 m/s
24.5°C
0.12 m/s
24.3°C
0.13 m/s
24.8°C
250 0.12 m/s
24.3°C
0.12 m/s
24.6°C
0.14 m/s
24.1°C
0.14 m/s
24.4°C
0.13 m/s
24.3°C
100 0.18 m/s
23.0°C
0.14 m/s
23.3°C
0.21 m/s
22.9°C
0.14 m/s
23.5°C
0.19 m/s
23.2°C


Installation


INSTALLATION


The JRF is connected directly onto the floor, by fixing the casing to the floor.
The front panel (supply air part) is fastened with screws.

Adjustment


ADJUSTMENT


The airflow rate is adjusted by setting the plenum chamber static pressure to the required pressure level.

Servicing


SERVICING




CODE DESCRIPTION
1 SCREWS
2 FRONT PANEL
3 CASING

Detach the front panel from the casing by unscrewing the screws..
Clean the parts by wiping them with a damp cloth, instead of immersing in water.
Reattach the front panel by screwing it to the casing.

Specification


SUGGESTED SPECIFICATIONS


The casing shall be made of galvanised steel.
The front panel shall be made of galvanised steel epoxy-painted to black (RAL 9005) colour.
The perforated plate inside the casing shall create sufficient pressure drop to enable self-balancing in applications with a pressurised plenum chamber.
The diffuser shall have a swirl air jet supply pattern.
Sound attenuation material within the casing shall be made of mineral wool.

Product Code


PRODUCT CODE



JRF/S-W-H

   S = Model
    N  Standard
    F  Front plate only

   W = Width
    330, 430

   H = Height
    130


Specifics and accessories

   CO = Colour
    B  Black

Code example

   JRF/N-330-130, CO=B

Downloads & Media

Halton JRF - se
Type
Datasheet
Language
sueco (Suecia)
Size
194.2 kB
Halton JRF - fr
Type
Datasheet
Language
francés (Francia)
Size
721.8 kB