SCS - Smoke control damper

Multi-blade single compartment smoke control damper

The size of SCS is up to 1250x1000 mm. Under pressure is S1500 and E120.

This product is CE marked (see downloads).

  • CE marked according to the product standard EN 12101-8:2011
  • Fire resistance class
    • E600 120(hodw-i↔o) S 1500C10000 AAsingle
    • E600 120(hodw)-i↔o) S 1500C10000 MAsingle
    • E600 120 (Vew-i↔o) S 1500C10000 AAsingle
    • E600 120 (Vew-i↔o) S 1500C10000 MAsingle
  • Certificate of constancy of performance 0809-CPR-1018
  • Classification of casing leakage EN 1751 class C
  • Manufacturing in accordance with the ISO 9001 quality standard.
  • Third party certification product audit by VTT, the Technical Research Centre of Finland.
  • Suitability for use in smoke extraction ducts with a maximum of 1500 Pa under pressure
  • Suitability for use in ducts with a maximum air speed of 15 m/s.
  • Suitability for rectangular smoke extraction ducts from size 200 mm x 200 mm to 1250 mm x 1000 mm.

Product Models and Accessories

  • Suitable for the automatically activated fire alarm systems (AA)
  • Suitable for the manual activated fire alarm systems (MA)
  • Models equipped with electric actuator (no fuse, no spring return)
  • Actuator with a visual position indicator
  • Circular duct connections
  • Modular damper casing extension for optional protecting mesh (L+210 mm)
  • Model with stainless steel AISI 316 material also available

Multi-blade-type single zone smoke control damper Halton SCS for rectangular and circular ducts with electric actuator and position indicator.

Damper has to fulfill the requirements from harmonized product standard EN 12101-8 and tested according to demands in standard EN 1366-10 and be labeled with CE Mark.

Damper has to be classified as:

E600 120(hodw-i↔o) S 1500C10000 AAsingle

E600 120(hodw)-i↔o) S 1500C10000 MAsingle

E600 120 (Vew-i↔o) S 1500C10000 AAsingle

E600 120 (Vew-i↔o) S 1500C10000 MAsingle

The casing and blades of the smoke control damper shall be made of galvanised or stainless steel and the blade gaskets made of incombustible material.

The smoke control damper shall be installed horizontal and vertical position, CE Marked, single compartment duct with incombustible sealing mass to ensure tightness of the connection

Halton SCS

CE marked Smoke Control Damper for single compartment

  • CE marked according to the product standard  EN 12101-8:2011
  • Fire resistance class
    • E600 120(hodw-i↔o) S 1500C10000 AAsingle
    • E600 120(hodw)-i↔o) S 1500C10000 MAsingle
    • E600 120 (Vew-i↔o) S 1500C10000 AAsingle
    • E600 120 (Vew-i↔o) S 1500C10000 MAsingle
  • Certificate of constancy of performance 0809-CPR-1018
  • Classification of casing leakage EN 1751 class C
  • Manufacturing in accordance with the ISO 9001 quality standard.
  • Third party certification product audit by VTT, the Technical Research Centre of Finland.
  • Suitability for use in smoke extraction ducts with a maximum of 1500 Pa under pressure
  • Suitability for use in ducts with a maximum air speed of 15 m/s.
  • Suitability for rectangular smoke extraction ducts from size 200 mm x 200 mm to 1250 mm x 1000 mm.

Product Models and Accessories

  • Suitable for the automatically activated fire alarm systems (AA)
  • Suitable for the manual activated fire alarm systems (MA)
  • Models equipped with electric actuator (no fuse, no spring return)
  • Actuator with a visual position indicator
  • Circular duct connections
  • Modular damper casing extension for optional protecting mesh (L+210 mm)
  • Model with stainless steel (AISI 316) material also available

Dimensions

Rectangular connections (R)


 

H/W 200-1000 1050 1100 1150 1200 1250
200 X H H H H H
300 X H H H H H
350 X H H H H H
400 X H H H H H
450 X H H H H H
500 X H H H H H
550 X H H H H H
600 X H H H H H
650 X H H H H H
700 X H H H H H
750 X H H H H H
800 X H H H H H
850 X H H H H H
900 X H H H H H
950 X H H H H H
1000 X H H H H H

X      Both horizontal and vertical blade direction allowed
     Horizontal blade direction only

 

Circular connections (C)

ØD W x H
100 150x150
125 150x150
160 200x200
200 200x200
250 250x250
315 300x300
400 400x400
500 500x500
630 600x600
800 800x800
1000 1000x1000

Material

 Number  Part  Material  Note
1, 2, 3  Casing  Galvanised steel  Stainless steel
 (AISI 316)
 also available
4  Blade stopper  Stainless steel (AISI 316)  
5  Support beam,
 W sides
 Galvanised steel  Stainless steel
 (AISI 316)
 also available
6  Bearing list,
 form actuator side
 Galvanised steel  Stainless steel
 (AISI 316)
 also available
7

 Actuator
 mounting bridge 

 Galvanised steel  Stainless steel
 (AISI 316)
 also available

Accessories

 Accessory Code  Description
 Damper casing extension CE  Lenght 210 mm
 E600 120 (hodw-i↔o) S 1500C10000 AAsingle
 E600 120 (Vew-i↔o) S 1500C10000 AAsingle
A  Non insulated actuator
 E600 120  (hodw)-i↔o) S 1500C10000 MAsingle
 E600 120  (Vew-i↔o) S 1500C10000 MAsingle
M  Actuator with
 heat insulated box

  

Electric actuator options

R1         BLE24 HL, operating voltage AC/DC 24 V (no fuse, includes limit switch)
             (H or W < 400 mm)
R2         BLE230 HL, operating voltage AC 230 V   (no fuse, includes limit switch)
             (H or W < 400 mm)
R3         BE24 HL, operating voltage AC/DC 24 V   (no fuse, includes limit switch)
R4         BE230 HL, operating voltage AC 230 V     (no fuse, includes limit switch) 

 

Halton SCS, model M = Actuator with insulated box, for automatic activation system.

Function

The Halton SCS is a motorised rectangular smoke control damper that allows smoke to be extracted from the single compartment space by dedicated smoke extraction system.

The smoke damper is made of fireproof materials with incombustible glass fiber blade gaskets. They are preventing the air to infiltrate the extraction ducts to collect smoke from closed dampers.

The Halton SCS smoke control damper shall be connected to the control and testing system delivered by Halton or to common building automation systems. The smoke control damper can be used in fully automatic (SCS/A) or manual activation (SCS/M) systems.

In case of fire sequence of operation is important, smoke extract fans should not be started before the smoke control dampers are opened.

Installation

Smoke control damper Halton SCS can be installed on the certified single compartment ducts. Damper can be also installed on the wall or floor surface. The blade direction may be either horisontal or vertical.

The correct operation of the smoke control damper must be ensured before and after installation.

After fixing the smoke control damper check the diagonal dimension.
The damper should be cleaned after installation.

Detailed installation instructions, as well as an installer's installation certificate form, are supplied with each product.

See also the section Documents for detailed installation guidance.

 

Installation on the single compartment duct

All dampers are delivered with an installation flange, which is used to fasten the fire damper with screws to the surface of steel duct or to a connection.

The gap between the damper and the supporting structure is filled with fireproof seal rock wool or firestop mastic, after fixing of the damper.

When Halton SCS is used as manual activated (MA) smoke control damper, connect the connection cables for electrical actuator inside of heat insulated box. Use nonflammable cables

Use M10 threaded rod for supporting the smoke control damper. See drawings below.

 

Installed to side of horisontal duct


 

Installed to side of vertical duct
Note!
Need to use CE marked smoke ducts.

 

 

Installed on the top and bottom of duct

         

Installed in the horisontal duct

               

 

Installed on the wall or floor surface

                

 

Electric actuator wiring diagram

Diagram below is used for actuators:

R1     BLE24 HL                                   R3     BE24 HL
R2     BLE230 HL                                 R4     BE230 HL

 

Servicing

No regular maintenance is required for the product.

Regular testing with the separate testing system is recommended twice a year.
Upon failure during testing of the smoke damper, a Halton representative shall be connected to ensure appropriate operation of the product

Specification

Multi-blade-type single zone smoke control damper Halton SCS for rectangular and circular ducts with electric actuator and position indicator.

Damper has to fulfill the requirements from harmonized product standard EN 12101-8 and tested according to demands in standard EN 1366-10 and be labeled with CE Mark.

Damper has to be classified as:

E600 120(hodw-i↔o) S 1500C10000 AAsingle

E600 120(hodw)-i↔o) S 1500C10000 MAsingle

E600 120 (Vew-i↔o) S 1500C10000 AAsingle

E600 120 (Vew-i↔o) S 1500C10000 MAsingle

The casing and blades of the smoke control damper shall be made of galvanised or stainless steel and the blade gaskets made of incombustible material.

The smoke control damper shall be installed horisontal and vertical position, CE Marked, single compartment duct with incombustible sealing mass to ensure tightness of the connection

Order Code

SCS-W-H; CM-MA-CT-SF-RE-AC-ZT

S  = Type of connection
        R     Rectangular
        C     Circular

D  = Connection size (if circular connection)
        100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000

W  = Width (if rectangular connection)
         200, +50, …, 1250

H  = Height (if rectangular connection)
        200, 300, +50, …, 1000
 

Other Options and Accessories

CM = Model
          A      Actuator without heat insulated box (for automatic activation system)
          M      Actuator with heat insulated box (for manual activation system)

MA = Material
         CS    Galvanised Steel
         AS    Stainless steel (AISI 316)

CT = Type of circular connection
         D2    Circular connections on both sides
         D1    Circular connection only on actuator side

SF = Flange option
         NA     Standard
         L1      Standard + flange connection
         L2      Flange connection on both sides
         R2      Flange connection with holes 

RE = Release type
         R1     BLE24 HL   (electric)    (H or W < 400 mm)
         R2     BLE230 HL (electric)  (H or W < 400 mm)
         R3     BE24 HL     (electric)
         R4     BE230 HL   (electric)

AC = Accessories
         CE     Casing extension of 210 mm, for structural thickness < 200mm

ZT  = Tailored product
         
N       No   
          Y       Yes
 

Code example         

          SCS/R-200-200 , CM=A, MA=CS, CT=D2, SF=NA, RE=B3, AC=NA, ZT=N

Downloads & Media

Halton SCS - huolto-ohje
Type
Handleiding
Taal
Fins (Finland)
Grote
212,4 kB
Halton SCS - fi
Type
Datasheet
Taal
Fins (Finland)
Grote
507,7 kB
Construction Product Regulation (CPR) - SCS
Type
Certificaat
Taal
Engels (Verenigd Koninkrijk)
Grote
50,8 kB
Halton SCS - uk
Type
Datasheet
Taal
Engels (Verenigd Koninkrijk)
Grote
508,6 kB
Halton SCS - asennusohjeet ja asennustodistus
Type
Handleiding
Taal
Fins (Finland)
Grote
2,0 MB