


This section is not available in English (Indonesia).
You can change the language by using the country selector below.
Halton JRP is a swirl type ceiling diffuser unit with a square-shaped, perforated front plate.
Halton JRP is a swirl type ceiling diffuser with a square-shaped powder-coated perforated front plate with a galvanised swirl element and plenum. The swirl element generates high induction swirl jet which ensures effective mixing of the supply air with air present in the room, as well as enables fast temperature decrease resulting in low air velocities in the comfort zone.
Halton JRP is a swirl type ceiling diffuser unit with a square-shaped, perforated front plate.
NS | Ø D |
250 | 249 |
Installation hole in the ceiling: 600 x 600 mm
Part | Material | Finishing | Note |
Casing | Galvanised steel | ||
Front panel | Steel | Epoxy-painted, white (RAL9010) | Special colours available |
Swirl part | Galvanised steel | ||
Coupling sleeve | Galvanised steel | ||
Screw cover | Plastic | White | |
Sound attenuation material | Polyester fibre | ||
Duct gasket | Rubber compound |
Model | Description |
JRP/S | Swirl diffuser unit for supply air with adjustment and measurement module( MSM) and internal sound attenuation (mineral wool or polyester fibre) |
JRP/E | Swirl diffuser unit for exhaust air with adjustment module( MEM) and internal sound attenuation (mineral wool or polyester fibre) |
JRP/N | Swirl diffuser unit (selectable options) - without adjustment and measurement module MSM (supply), adjustment module MEM (exhaust) and internal sound attenuation - with adjustment and measurement module MSM (supply) and without sound attenuation - with adjustment module MEM (exhaust) and without sound attenuation - without adjustment and measurement module MSM (supply) and with sound attenuation - without adjustment module MEM (exhaust) and with sound attenuation |
Horizontal radial swirl jet is supplied into the space through the profiled spiral blades
of the diffuser. Supply air jet velocity is efficiently reduced due to the high mixing effect.
Halton JRP can also be used as an exhaust unit.
S = Model (see tab Product Models for more information)
S Supply (with MSM, sound attenuation)
E Exhaust (with MEM, sound attenuation)
N Naked (without MSM, MEM and sound attenuation)
D = Diameter of duct connection
250
OM = Measurement/adjustment module
YS MSM installed (supply)
YE MEM installed (exhaust)
NA No measurement or adjustment module
AT = Sound attenuation material
P Polyester fibre
W Mineral wool
NA No sound attenuation
IN = Sound attenuation options
4 Sound attenuation on 4 sides
NA No sound attenuation
CO = Colour
W White
X Special colour
ZT = Tailored product
N No
JRP/S-250, OM=YS, AT=P, IN=4, CO=W, ZT=N
Halton JRP - fr | Type Datasheet | Language French (France) | Size 430.8 kB |