CAR - Conical diffuser

Circular diffuser for ceiling installation

Ideal for high spaces.

  • Horisontal air supply
  • Suitable for supply/exhaust and high airflow rates
  • Cooling applications with supply/room air temperature difference as low as -16 °C
  • Also suitable for heating
  • Integrated or suspended ceiling installation
  • Circular duct connection with rubber gasket
  • Openable cone module enables the cleaning of the diffuser and ductwork

Product Models and Accessories

  • Balancing plenum with adjustment functions (PLC) or even with measurement function (TRI).
  • Adjustment module for balancing of the airflow
  • Modular 600x600 mm suspended ceiling model

The diffuser is made of several stamped cones, made of epoxy-painted steel with a white (RAL 9010) standard colour.

The diffuser is suitable for installation on exposed ductwork or flush to the ceiling.

The diffuser is connected to the ductwork using a Halton TRI balancing plenum, which utilises polyester fibre with a washable surface as sound attenuation material.

The diffuser is connected to the ductwork using a Halton PLC plenum, which utilises mineral wool as sound attenuation material.

The plenum comprises an airflow measurement and adjustment unit.

The conical central core is removable.

The air discharge pattern is radial around the full perimeter of the air diffuser.
The cones form divergent sections, which creates underpressure inducing room air into the unit.

Halton CAR

Circular conical diffuser

  • Horisontal air supply
  • Suitable for supply/exhaust and high airflow rates
  • Cooling applications with supply/room air temperature difference as low as -16 °C
  • Also suitable for heating
  • Integrated or suspended ceiling installation
  • Circular duct connection with rubber gasket
  • Openable cone module enables the cleaning of the diffuser and ductwork

Product Models & Accessories

  • Balancing plenum with adjustment functions (PLC) or even with measurement function (TRI).
  • Adjustment module for balancing of the airflow
  • Modular 600x600 mm suspended ceiling model

Dimensions


 

NS W H H1 ØD
160 343 65 54 159
200 457 80 70 199
250 571 87 88 249
315 686 91 106 314
355 857 102 133 354
400 857 100 133 399
450 1030 120 157 449
560 1200 124 184 558

Special dimensions are not available.

Material

 Part  Material  Finishing
 Diffuser  Steel  Epoxy-painted,
 white (RAL 9010)
 Plenum box  Galvanised steel  

Accessories

 Accessory Code  Description
 Plenum PLC  Plenum for duct connection
 (with or without insulation)
 Balancing plenum with
 airflow measurement and
 adjustment unit
TRI/N  For balancing, equalising the airflow
 Sound attenuation IN  Polyester fibre as sound attenuation material
 in the TRI plenum.
 Mineral wool as sound attenuation material
 in the PLC plenum.
 Airflow measurement
 and adjustment unit
MSM  For supply installation

Product Models

 Product model Code  Description
 Diffuser integrated in front panel,
 600 x 600 mm
CAR/B  Sizes 160, 200 and 250 are available
 as integrated in a steel panel for
 installation in a modular 600x600 mm
 suspended ceiling.

 The external dimensions of the
 front panel are 595 mm x 595 mm

Function

Supply air is divided into several jets through the cones.
The divergent sections of the diffuser create negative pressure under the diffuser so room air is induced into the supply air terminal. Room air and supply air mix.

This internal induction reduces temperature and the air velocity into the space.
The process is the same outside the diffuser between the supply and mixed room air, with external induction further reducing velocity and the temperature difference between supply and room air.

The diffuser can also be used as an exhaust unit.

Installation

The Halton CAR diffuser can be installed flush with a suspended ceiling or fully exposed in the space.
The diffuser is connected directly to the duct using a Halton PLC plenum or Halton TRI balancing plenum. When it is connected directly to ductwork, a safety distance of minimum 3D upstream of the diffuser should be maintained.
 

Installation with plenum Halton TRI or PLC


 

Halton TRI

CAR ØD TRI H2 H1
160 159 TRI-160-160 304…334 54
200 199 TRI-200-200 369…399 70
250 249 TRI-250-250 440…470 88
315 314 TRI-315-315 490…520 106

 

Halton PLC

CAR ØD PLC H2 H1
160 159 PLC-160 290…320 54
200 199 PLC-200 395…425 70
250 249 PLC-250 402…432 88
315 314 PLC-315 556…686 106
355 349 PLC-355 567…597 133
400 399 PLC-400 565…595 133
450 449 PLC-450 785…815 157
560 559 PLC-560 789…819 184


When the Halton TRI spigot is installed in the plenum, the H dimensions can be reduced by 60 mm.

The technical performance for the combination of supply air diffuser and Halton TRI plenum is presented separately for the two different installations.
 

Dimensions of the ceiling opening

CAR ØW1
160 290
200 406
250 510
315 610
355 760
400 760
450 915
560 1065

Adjustment

The airflow rate can be adjusted and measured only when the diffuser is installed.

In order to enable airflow adjustment and measurement of airflow rate, it is recommended to connect the diffuser to a plenum equipped with the MSM module.
The supply flow rate is determined using measurement and adjustment module MSM.

Detach the conical central core and pass the tubes and control spindle through the diffuser.
Measure the differential pressure with a manometer. The flow rate is calculated using the formula below.

Adjust the airflow rate by rotating the control spindle until the desired setting is achieved.
Lock the damper position with a screw.
Replace the tubes and spindle in the plenum and push the conical central core back into place.

The k factor for installations with different safety distances (D= duct diameter)

PLC/TRI >8xD min 3XD
125 9.9 12.6
160 16.9 21.9
200 28.3 31.0
250 47.9 51.5
315 78.6  

Service

Remove the conical central core by unscrewing it from the frame.
Clean the parts by wiping them with a damp cloth.
Put each screw back in place, and screw on until the conical central core fits in place.

Option: with balancing plenum TRI + MSM or PLC + MSM

Remove the measurement and adjustment module by pulling gently on the shaft (not the control spindle).
Wipe the parts with a damp cloth, instead of immersing in water.

Reassemble the measurement and adjustment module by pushing the shaft until the module meets the stopper.
Put each screw back in place, and screw on until the conical central core fits in place.

Specification

The diffuser is made of several stamped cones, made of epoxy-painted steel with a white (RAL 9010) standard colour.

The diffuser is suitable for installation on exposed ductwork or flush to the ceiling.

The diffuser is connected to the ductwork using a Halton TRI balancing plenum, which utilises polyester fibre with a washable surface as sound attenuation material.

The diffuser is connected to the ductwork using a Halton PLC plenum, which utilises mineral wool as sound attenuation material.

The plenum comprises an airflow measurement and adjustment unit.

The conical central core is removable.

The air discharge pattern is radial around the full perimeter of the air diffuser.
The cones form divergent sections, which creates underpressure inducing room air into the unit.

Order Code

CAR-D

 D = Diameter of duct connection
  
    160, 200, 250, 315, 355, 400, 450, 560
 

Other options and accessories

WS = Width of suspended ceiling element   
          NA      Not Assigned

CO = Colour
          W      White
          X       Special colour

ZT = Tailored product   
        
  N        No   
          Y        Yes
 

Sub products

          TRI      Plenum (Diffusers)
          PLC    Plenum (Ceiling diffusers)
 

Code example

           CAR-160, WS=NA,CO=W, ZT=N

Downloads & Media

Halton CAR - dk
类型
技术参数
语言
丹麦文 (丹麦)
尺寸
633.9 kB
Halton CAR - gb
类型
技术参数
语言
英文 (英国)
尺寸
633.3 kB
Halton CAR - nl
类型
技术参数
语言
荷兰文 (荷兰)
尺寸
634.5 kB
Halton CAR - ru
类型
技术参数
语言
俄文 (俄罗斯)
尺寸
664.9 kB
Halton CAR - fi
类型
技术参数
语言
芬兰文 (芬兰)
尺寸
630.2 kB
Halton CAR - se
类型
技术参数
语言
瑞典文 (瑞典)
尺寸
633.6 kB
Halton CAR - fr
类型
技术参数
语言
法文 (法国)
尺寸
466.3 kB