Halton ASC – Window sill grille

• Window sill installations, fan coil applications
• Air supply, also suitable for exhaust
• Fixed vanes, stable throw pattern without deflection or with vertical 15° deflection
• Aluminium design with elegant appearance
• Detachable grille allows cleaning of the grille and ductwork

Product models and accessories

• Model without frame
• Model with access door
• Installation frame

Halton ASC with frame

The free area of the ASC grille is 65 %.

Halton ASC without frame

Special dimensions

In addition to these standard sizes, other dimensions are available on special order. The maximum nominal size is 1200×150 mm.

For models with a frame, the grille is connected directly to the duct using the IF installation frame.

Clips fastening (standard)

For models with a frame, the grilles are supplied with a clips fastening as standard.
Clips fastening is used with an installation frame.

Concealed screw fastening

For models with a frame, concealed screw fastening is possible when the grille is installed with an installation frame (IF).

Visible screw fastening is not possible due to the reduced width of the frame (18 mm).

The size of the installation hole is L-5 x H-5 when a model with a frame is installed with an installation frame.

The size of the installation hole is L x H for a model without a frame.

Remove the grille by pulling gently on the grille from the outer frame, and clean the parts by wiping them with a damp cloth.
Push the grille back into place so that the clips lock (or fix in place by tightening the concealed screws).

The grille has horizontal fixed vanes without deflection or with deflection at a 15° angle. These are to be anodised or polyester-painted with a white (RAL 9003) colour as standard.

Option 1

The grille has an access door to provide access to the control of the fan coil, with an 18-mm-wide flat frame or without a frame.

Option 2

The grille is constructed without a frame.
It is possible to remove the grille to provide access to the fan coil.

ASC/S-L-H; AD-FR-FS-FI-CO-ZT  

S = Model (vane angle)
U         Vane angle 0°
E         Vane angle 15°

L = Length (mm)
600, +1, .., 1200

H = Height (mm)
100,150

Other options and accessories

AD = Access Door (Y/N)
Y         Yes
N         No

FR = Frame Option (Y/N)
Y         Yes
N         No

FS = Fastening
CL       Clips
CC       Concealed screw fastening
NA       Not assigned

FI = Finishing
AN       Anodised
PN       Painted

CO = Colour
SW     Signal white (RAL 9003)
X         Special colour
N        No painting

ZT = Tailored Product
N        No
Y        Yes (ETO)

Code example

ASC/U-600-100, AD=N, FR=N, FS=NA, FI=AN, CO=N, ZT=N