ALU - Grille

Universal grille with vertical 0⁰ deflection

Aesthetic in design, suitable for indoor use. Air flow pattern is vertical.

  • Horizontal air supply, also suitable for exhaust
  • Fixed vanes, stable throw pattern with no deflection
  • Aluminium design with elegant appearance
  • Detachable grille allows cleaning of the grille and ductwork
  • Continuous grilles available with modular design

Accessories

  • Airflow adjustment damper
  • Plenum options with measurement and adjustment functions
  • Installation frame

The grille has horisontal fixed vanes and a 18 mm wide flat frame, anodized or polyester-painted with a white (RAL 9010) colour.

Option 1

The grille can be connected to the ductwork using a plenum with mineral wool as sound insulation material.

Option 2

The grille can be connected to the ductwork using a balancing plenum, which comprises polyester fibre with a washable surface as sound attenuation material.
The plenum can have an airflow measurement and adjustment unit.
The grille is removable in order to provide access to the measurement and adjustment module in the plenum.

Halton ALU

Grille

  • Horizontal air supply, also suitable for exhaust
  • Fixed vanes, stable throw pattern with no deflection
  • Aluminium design with elegant appearance
  • Detachable grille allows cleaning of the grille and ductwork
  • Continuous grilles available with modular design

Accessories

  • Airflow adjustment damper
  • Plenum options with measurement and adjustment functions
  • Installation frame

Dimensions

 

LxH  L1  L2  H1  H2 
200x50  212 176 62 26
200x100  212 176 112 7
300x100  312 276 112 76
400x100  412 376 112 76
500x100  512 476 112 76
600x100  612 576 112 76
800x100  812 776 112 76
1000x100  1012 976 112 76
600x150  612 576 162 126
800x150  812 776 162 126
1000x150  1012 976 162 126
1200x150  1212 1176 162 126
1500x150  1512 1476 162 126
600x200  612 576 212 176
800x200  812 776 212 176
1000x200  1012 976 212 176
1200x200  1212 1176 212 176
1500x200  1512 1476 212 176

With flow control damper OD total depth is 35 mm + 45 mm.

The free area of the ALU grille is 65 %.

Special dimensions

In addition to standard sizes, other sizes can be specially ordered. The maximum size is 1500x500 mm (LxH).
It is possible to have a continuous grille of modular design when the installation length is greater than 1500 mm. The maximum total length is 20 m.

Material

 Part  Material  Finishing  Note
 Frame  Aluminium  Polyester-painted as
 white (RAL9010/50% gloss),
 anodised or
 mill finished
 Special colours
 available
 Epoxy-painting
 (100 %) available
 Vanes  Aluminium  Polyester-painted as
 white (RAL9010/50% gloss),
 anodised or
 mill finished
 Special colours
 available
 Epoxy-painting
 (100 %) available
 Installation frame  Galvanised steel    
 Plenum box / spigot  Galvanised steel    

Accessories

 Accessory Code  Description
 Balancing plenum PRL  For balancing & equalising the airflow
 and attenuating the duct noise
 Plenum BDR  Plenum for duct connection
 (with or without attenuation material)
 Sound attenuation IN  Mineral wool for the BDR plenum box.
 Polyester fiber for the PRI plenum box.
 Flow adjustment damper OD  Aluminium opposite blade damper
 for airflow adjustment
 Installation frame IF  For installation without plenum
 Concealed screw fastening CC  For installation with BDR plenum or IF frame

Function

Supply air is supplied without deflection through the vanes into the space mixing with room air in front of the grille.
Wall installation for horizontal supply or ceiling installation for vertical supply.
The grille can also be used as an exhaust unit.

Installation

The grille is connected to the circular duct using either a Halton PRL balancing plenum or a Halton BDR plenum or alternatively directly to the rectangular duct using the IF/ALU installation frame.


 Installation frame, IF/ALU         Balancing plenum, PRL           Plenum, BDR

Clips fastening (standard)

The grilles are supplied with clips fastening as standard.
Clips fastening is used with Halton PRL, Halton BDR and IF/ALU.

Concealed screw fastening



Concealed screw fastening is possible when the grille is installed with an installation frame (IF/ALU) or with a Halton BDR plenum, though not with a Halton PRL balancing plenum. Holes for screws are provided in the Halton BDR.

For ceiling installation concealed screw fastening is recommended.

Visible screw fastening

Visible screw fastening is not possible due to the reduced width of the frame (18 mm).

Size of the installation hole is LxH when an installation frame is used and (L-5) x (H-5) without an installation frame.

Adjustment

In order to enable airflow adjustment and measurement of airflow rate it is recommended that you connect the diffuser to the Halton BDR plenum or Halton PRL balancing plenum equipped with the MSM module.
The supply flow rate is determined by using the measurement and adjustment module MSM.
Detach the grille and pass the tubes and control spindle through the grille.
Measure the differential pressure using a manometer. The flow rate is calculated using the formula below.

        

Adjust the airflow rate by rotating the control spindle until the desired setting is achieved.
Lock the damper position with a screw.
Replace the tubes and spindle in the plenum and replace the grille.

The k factor for installations with different safety distances
(D= duct diameter)

Halton BDR

D >6xD min 3xD
100 6 7
125 10 12
160 19 22
200 28 32
250 49 51
315 77 83

 

Airflow adjustment damper OD

The airflow rate is adjusted by turning the damper blades behind the grille using a screwdriver. The measurement is carried out when grille is installed.

Servicing

Remove the grille by gently pulling the grille from the outer frame and clean the parts by wiping them with a damp cloth.
Push the grille back into place so that the clips lock (or fix by tightening the concealed screws).

Option:
With balancing plenum Halton PRL or Halton BDR + MSM

Remove the measurement and adjustment module by gently pulling the shaft (NB. not the control spindle or measurement tubes!).
Wipe the parts with a damp cloth, instead of immersing in water.
Reassemble the measurement and adjustment module by pushing the shaft until the module meets the stopper.
Push the grille back into place so that the clips lock.

Specification

The grille has horisontal fixed vanes and a 18 mm wide flat frame, anodized or polyester-painted with a white (RAL 9010) colour.

Option 1

The grille can be connected to the ductwork using a plenum with mineral wool as sound insulation material.

Option 2

The grille can be connected to the ductwork using a balancing plenum, which comprises polyester fibre with a washable surface as sound attenuation material.
The plenum can have an airflow measurement and adjustment unit.
The grille is removable in order to provide access to the measurement and adjustment module in the plenum.

Order Code

ALU-L-H

L = Length
       200, +1, .., 20000

H = Heigth
       50, +1, .., 500

Other options and accessories

FS  = Fastening
         CL       Clips
         CC       Concealed screw fastening

FI =  Finishing
        AN        Anodised
        MF        Mill finished
        PN        Painted

CO = Colour
         W        White
         X         Special colour
         N         No painting

ZT = Tailored product
        N          No
        Y          Yes

Sub products

       BDR        Plenum
       PRL        Balancing plenum
       IF           Installation frame (Grilles)
       OD         Opposed blade damper (Grilles)

Code example

      ALU-200-50, FS=CL, FI=AN, CO=N; ZT=N

Downloads & Media

Halton ALE-ALU - fr
类型
技术参数
语言
法文 (法国)
尺寸
959.9 kB
Halton ALE-ALU - ru
类型
技术参数
语言
俄文 (俄罗斯)
尺寸
1.3 MB
Halton ALE-ALU - se
类型
技术参数
语言
瑞典文 (瑞典)
尺寸
1.3 MB
Halton ALE-ALU - fi
类型
技术参数
语言
芬兰文 (芬兰)
尺寸
1.3 MB
Halton ALE-ALU - nl
类型
技术参数
语言
荷兰文 (比利时)
尺寸
1.3 MB
Halton ALE-ALU - gb
类型
技术参数
语言
英文 (英国)
尺寸
1.3 MB