• Shut-off, adjustment, balancing or control damper
• Casing leakage classification: EN 1751, Class C
• Casing and damper blade made of galvanized steel
• Tightness classification of shut-off damper: EN 1751, Class 4 (PTS/A model) 

Product models & Accessories

• Shut-off, adjustment, balancing or control damper
• Adjustment, balancing or control damper
• Adjustment, balancing or control damper with perforated blade
• Several actuator options

• Dimensions and weight
• Material
• Product Models
• Function
• Installation
• Specification
• Order Code

Halton PTS

Single-Blade Damper

• Shut-off, adjustment, balancing or control damper
• Casing leakage classification: EN 1751, Class C
• Casing and damper blade made of galvanized steel
• Tightness classification of shut-off damper: EN 1751, Class 4 (PTS/A model)

Product Models & Accessories

• Shut-off, adjustment, balancing or control damper
• Adjustment, balancing or control damper
• Adjustment, balancing or control damper with perforated blade
• Several actuator options

Dimensions and weight ▲

Actuator platform, low (ML)

Actuator platform, high (MH)

Weight (kg)

Material ▲

Product Models ▲

There are three different product models, for different purposes:

• Shut-off, adjustment, balancing or control damper, PTS/A. Tightness classification: EN 1751, Class 4
• Adjustment, balancing or control damper, PTS/B
• Adjustment, balancing or control damper with perforated blade, PTS/C

Minimum torque

Manual operation

Handle for manual operation with blade position locking.

Actuator options

Standard actuators:
Belimo LM24A / LM230A / LM24A-SR (5 Nm), NM24A / NM230A / NM24A-SR (10 Nm) and LF24 / LF230 (4 Nm)

For technical data for available actuators, consult the list below.

After sales installation of the actuator

Actuator installation on the site is possible with the help of an actuator bed and extension shaft. This enables installation of a universal actuator type. The actuator bed selected can be of standard type when the ductwork is not insulated or of high type if the ductwork is insulated.
 

Halton PTS/A with actuator (B4)

Actuator  IL / IH PTS

Electrical actuator: Specific Data

If other actuator types are required, consult Halton in order to specify the type and manufacturer.

Function ▲

The Halton PTS unit can operate as a shut-off, control or adjustment damper depending on the product model. This damper is available for circular standard duct sizes 100 mm to 500 mm. Damper position is visually indicated below the operating mechanism.

The Halton PTS/A is a shut-off damper of leakage class 4 according to the EN 1751 standard. It includes rubber gaskets to ensure low leakage flow when the damper is in closed position. The PTS/A is available with a handle for manual operation or with an electric actuator for on-off control or for modulating control using a 0...10 VDC control signal.

The Halton PTS/B can be used for airflow control or adjustment of airflow rates in the ductwork. It includes a steel blade without gasket. The PTS/B is available with a handle for manual operation or with an electric actuator for on-off control or for modulating control using a 0…10 VDC control signal.

The Halton PTS/C is an airflow adjustment damper. The damper blade is a perforated blade that is acoustically and operationally designed for balancing of airflow rates.

The electric actuator is normally installed in the factory on the actuator platform with screws. On-site actuator installation is possible with the help of an actuator installation kit. The actuator installation kit, available as an accessory, includes an actuator platform and extension shaft for universal actuator fixing. The actuator platform and actuator can be installed easily using standard hand tools.
 

Halton PTS/A

Halton PTS/B

Halton PTS/C

Installation ▲

Fasten the damper to the ductwork with, e.g., rivets. Ensure that the rivets do not prevent the operation of the damper. The position of each rivet must be at least 10 mm from the duct end.
External duct gaskets ensure an airtight joint when the damper has been mechanically fastened to the duct with rivets or screws.
The electric actuator (where applicable) is to be connected to the power supply and control signal wires according to the wiring diagram. Examples of connections for the standard actuators are shown in a separate diagram.
The electric actuator can also be installed, when necessary, in an on-site procedure with the help of an actuator platform and universal shaft fitting, available as an accessory:
Remove the operating mechanism (1) by opening the locking screw.
Assemble the actuator platform in the location of the operation mechanism (2) and ensure its stability mechanically by bending the legs of the actuator platform with a hand tool.
The universal actuator fitting enables connection of most actuator types to the shaft (3) (4).
Wire connections are to be performed according to the instruction for the actuator installed.
 

Electric wire connections

Belimo

Specification ▲

The casing and circular (perforated) blade of the shut-off / adjustment / control damper shall be made of galvanised steel.
The shut-off damper shall meet EN 1751, Class 4 tightness requirements.
External rubber gaskets on the spigot shall provide an airtight connection to circular ductwork.

Order Code ▲

PTS/S-D

S = Version
       A    Damper with blade gasket
       B    Damper without blade gasket
       C    Damper with perforated blade

D = Diameter of duct connection
       100, 125, 160, 200, 250, 315, 400, 500

Other options and accessories

MA = Material
        CS     Steel

MO = Actuator type
         NA     Manual=hand adjustment
         B1     LM24A, 5 Nm, 24 VAC/VDC, on-off
         B2     LM230A, 5 Nm, 230 VAC, on-off
         B3     LM24A-SR, 5 Nm, 24 VAC/VDC, modulating
         B4     NM24A, 10 Nm, 24 VAC/VDC, on-off
         B5     NM230A, 10 Nm, 230 VAC, on-off
         B6     NM24A-SR, 10 Nm, 24 VAC/VDC, modulating
         B7     LF24, 4 Nm, 24 VAC/VDC , on-off, spring return
         B8     LF230, 4 Nm, 230 VAC, on-off, spring return

AC = Accessories  
        BA     Bar adjustment
        ML     Actuator platform, low
        MH     Actuator platform, high
        IL       Installation kit for actuator, low
        IH       Installation kit for actuator, high
        IJ        Actuator platform; low for LF actuator

ZT = Tailored product
        N        No
        Y        Yes

Code example

   PTS/A-100, MA=CS, MO=NA, ZT=N